[1]冯 瑶,杨明秦,任国庆,等.适用于短尺顶管加工的双坡口一次切割装置[J].焊管,2021,44(2):38-42.[doi:10.19291/j.cnki.1001-3938.2021.02.008]
 FENG Yao,YANG Mingqin,REN Guoqing,et al.Cutting Device with Double Groove for Short Size Pipe Jacking[J].,2021,44(2):38-42.[doi:10.19291/j.cnki.1001-3938.2021.02.008]
点击复制

适用于短尺顶管加工的双坡口一次切割装置()
分享到:

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
第44卷
期数:
2021年第2期
页码:
38-42
栏目:
工艺与设备
出版日期:
2021-02-28

文章信息/Info

Title:
Cutting Device with Double Groove for Short Size Pipe Jacking
文章编号:
10.19291/j.cnki.1001-3938.2021.02.008
作者:
冯 瑶杨明秦任国庆杨 勇卢永兵李 莉
渤海装备江苏钢管公司, 江苏 扬州 225128
Author(s):
FENG Yao YANG Mingqin REN Guoqing YANG Yong LU Yongbing LI Li
Bohai Equipment Jiangsu Steel Pipe Company, Yangzhou 225128, Jiangsu, China
关键词:
螺旋埋弧焊管短尺顶管双坡口一次切割单坡口切割等离子切割切管错牙
Keywords:
spiral submerged arc welded pipe short size pipe jacking double groove cutting single groove cutting plasma cutting pipe cutting wrong tooth
分类号:
TG483
DOI:
10.19291/j.cnki.1001-3938.2021.02.008
文献标志码:
B
摘要:
为了满足某供水网络工程所需短尺顶管长度要求,为螺旋埋弧焊管飞焊机组增设了线下双坡口一次切割装置。该装置主要由主动旋转辊、被动旋转辊、切割组件以及固定底座组成,通过待切焊管做圆周运动、2个切割枪头静止不动实现对12 m定尺焊管的切割和管端双坡口加工。同时针对装置使用过程中易出现的切管错牙问题,提出了增加旋转工装的解决办法。应用表明,双坡口一次切割装置能够满足多规格短尺顶管的切割和坡口加工,并且提高了加工效率。
Abstract:
In order to meet the length requirement of short size pipe jacking required by a water supply network project, an off-line double groove cutting device is added for the spiral submerged arc welded pipe welding unit. The device is mainly composed of active rotating roller, passive rotating roller, cutting component and fixed base. Through the circular movement of the pipe to be cut and the static cutting gun head, the butt cutting of 12 m length welded pipe and the double groove processing of pipe end are realized. At the same time, aiming at the problem of the wrong tooth in the process of using the device, the solution of adding rotating tooling is proposed. The application shows that the double groove cutting device can meet the cutting and groove processing of multi specification short size pipe jacking, and improve the processing efficiency.

参考文献/References:

[1] 李登超. 冷弯型钢及焊管生产技术[M]. 北京:化学工业出版社,2011.

[2] 成大先. 机械设计手册[M]. 北京: 化学工业出版社,2003.
[3] 洪松涛,林圣武,郑应国,等. 等离子弧焊接与切割一本通[M]. 上海:上海科学技术出版社,2015.
[4] 邱言龙,聂正斌,雷振国. 等离子弧焊与切割技术快速入门[M]. 上海:上海科学技术出版社,2011.
[5] 李冰. 提高火焰切割坡口精度措施[J]. 煤矿机械,2018,39(7):141-142.
[6] 汪宏亮. 论等离子坡口切割中工艺参数的重要性[J]. 金属加工(热加工),2016(22):24-26.
[7] 平风祥. 如何提高切割坡口质量[J]. 科技与企业,2015(7):183.
[8] 王俊. 管道坡口机高效加工坡口的方法[J]. 机械工程师,2013(3):136-138.
[9] 洪嘉振,刘铸永,杨长俊. 理论力学[M]. 北京:高等教育出版社,2015.
[10] 单辉祖. 材料力学[M]. 北京:高等教育出版社,2016.
[11] 陈晓南,杨培林,陈钢,等. 机械设计基础[M]. 北京:科学出版社,2018.
[12] 张丽杰,徐来春. 机械设计实用机构图册[M]. 北京:化学工业出版社,2019.
[13] 王爱平,朱同波,翟富林. 机械零件与机构[M]. 北京:北京希望电子出版社,2019.
[14] 闫红英. 离子切割常见缺陷和控制方法[J]. 科技创新与应用,2020(20):105-106.
[15] 张睿铭,马殿光,赖晓阳,等. 精细等离子切割的控制策略研究[J]. 电力电子技术,2019(8):67-69.

相似文献/References:

[1]胡德虎,赵 炜,牛 辉,等.螺旋埋弧焊管双丝高速焊工艺参数的优化[J].焊管,2007,30(4):69.[doi:1001-3938(2007)04-0069-03]
 HU De-hu,ZHAO Wei,NIU Hui,et al.Process Parameters Optimization of High Speed Welding with Double Wires for Spiral Submerged Arc Welded Pipe[J].,2007,30(2):69.[doi:1001-3938(2007)04-0069-03]
[2]杨 志 孝.一种简单实用的螺旋埋弧焊管内焊清渣机[J].焊管,2007,30(5):63.[doi:1001-3938(2007)05-0063-03]
 YANG Zhi-xiao.New & Practical Welding Slag Cleaning Unit for Inside Welding of Helical Submerged Arc Welding Pipe[J].,2007,30(2):63.[doi:1001-3938(2007)05-0063-03]
[3]毕宗岳,王海博,王高峰.螺旋埋弧焊管焊缝形貌优化研究[J].焊管,2008,31(2):14.[doi:1001-3938(2008)02-0014-05]
 BI Zong-yue,WANG Hai-bo,WANG Gao-feng.Optimization Research on Weld Profile of Spiral Submerged Arc Welded Pipe[J].,2008,31(2):14.[doi:1001-3938(2008)02-0014-05]
[4]李必文,杨春雨,王树人,等.带钢边缘加工工艺的改进——双铣边替代剪边[J].焊管,2008,31(2):63.[doi:1001-3938(2008)02-0063-04]
 LI Bi-wen,YANG Chun-yu,WANG Shu-ren,et al.Improvement of Machining Process for Strip Edges-replacing Edges Cutting with Double Milling[J].,2008,31(2):63.[doi:1001-3938(2008)02-0063-04]
[5]秦跃平.前摆式螺旋埋弧焊管机组内焊缝裂纹产生原因分析[J].焊管,2008,31(4):62.[doi:1001-3938(2008)04-0062-02]
 QIN Yue-ping.Analysis on Reason of Inside Weld Crack of Front Swing SSAW Pipe Units[J].,2008,31(2):62.[doi:1001-3938(2008)04-0062-02]
[6]林春明,徐泽旋,朱文闯,等.螺旋埋弧焊管焊缝中链状气孔的判定[J].焊管,2008,31(4):69.[doi:1001-3938(2008)04-0069-03]
 LIN Chun-ming,XU Ze-xuan,ZHU Wen-chuang,et al.Verification to Chain Porosity in Weld of SSAW Pipe[J].,2008,31(2):69.[doi:1001-3938(2008)04-0069-03]
[7]李为卫,王亚龙,李 洋,等.小批量试制X80级板卷及焊管的拉伸性能分析[J].焊管,2008,31(5):16.[doi:1001-3938(2008)05-0016-04]
 LI Wei-wei,WANG Ya-long,LI Yang,et al.Analysis on Tensile Properties of Small Batch Trial-produced X80 Grade Steel Coil and Welded Pipe[J].,2008,31(2):16.[doi:1001-3938(2008)05-0016-04]
[8]宗 波,王树人,王铁民,等.国产X80级螺旋埋弧焊管的试制[J].焊管,2008,31(6):39.[doi:1001-3938(2008)06-0039〖KG-*2〗-04]
 ZONG Bo,WANG Shu-ren,WANG Tie-min,et al.Trial Production of X80 Grade Helically Submerged Arc Welded Pipe in China[J].,2008,31(2):39.[doi:1001-3938(2008)06-0039〖KG-*2〗-04]
[9]陈小康,张毅.螺旋埋弧焊管生产过程卷板消耗定额编制方法及应用[J].焊管,2009,32(5):70.[doi:1001-3938(2009)05-0070-03]
 CHEN Xiao-kang,ZHANG Yi.Formulate Steel Coil Consumption Quota Method During SSAW Pipe Production and Its Application[J].,2009,32(2):70.[doi:1001-3938(2009)05-0070-03]
[10]孟德强,宁月,徐辉.螺旋埋弧焊管常见焊接裂纹的分析[J].焊管,2009,32(7):58.[doi:1001-3938(2009)07-0058-04]
 MENG De-qiang,NING Yue,XU Hui.Analysis on Common Welding Crack of SSAW Pipe[J].,2009,32(2):58.[doi:1001-3938(2009)07-0058-04]

备注/Memo

备注/Memo:
收稿日期:2020-10-15
作者简介:冯 瑶(1987—),女,工程师,主要从事螺旋焊管生产线机械液压技术工作。
更新日期/Last Update: 2021-04-08