[1]柳锁贤,张小龙,王志明,等.钻井隔水管主管环缝焊接工艺研究[J].焊管,2021,44(7):23-26.[doi:10.19291/j.cnki.1001-3938.2021.07.004]
 LIU Suoxian,ZHANG Xiaolong,WANG Zhimin,et al.Research on Process of Main Pipe Girth Welding of Drilling Riser[J].,2021,44(7):23-26.[doi:10.19291/j.cnki.1001-3938.2021.07.004]
点击复制

钻井隔水管主管环缝焊接工艺研究()
分享到:

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
第44卷
期数:
2021年第7期
页码:
23-26
栏目:
试验与研究
出版日期:
2021-07-28

文章信息/Info

Title:
Research on Process of Main Pipe Girth Welding of Drilling Riser
文章编号:
10.19291/j.cnki.1001-3938.2021.07.004
作者:
柳锁贤张小龙王志明刘宏亮徐斌荣付 堃
1. 宝鸡石油机械有限责任公司,陕西 宝鸡 721002;
2. 中油国家油气钻井装备工程技术研究中心有限公司,陕西 宝鸡 721002;
3. 山东祺龙海洋石油钢管股份有限公司,山东 东营 257055
Author(s):
LIU Suoxian ZHANG Xiaolong WANG Zhimin LIU Hongliang XU Binrong FU Kun
1. CNPC Baoji Oilfield Machinery Co., Ltd., Baoji 721002, Shaanxi, China;
2. National Oil and Gas Drilling Equipment Engineering Technology Research Center, Baoji 721002,Shaanxi, China;
3.Shandong Qilong Offshore Oil Steel Pipe Co., Ltd., Dongying 257055, Shandong, China
关键词:
X80钻井隔水管主管环缝焊接工艺
Keywords:
X80 drilling riser main pipe girth weld welding process
分类号:
TG44
DOI:
10.19291/j.cnki.1001-3938.2021.07.004
文献标志码:
A
摘要:
为了研究X80海洋钻井隔水管单根主管环缝焊接工艺,在对隔水管单根主管材料、使用工况、焊接方法分析的基础上,确定了X80隔水管的环缝焊接材料及焊接工艺,即选用Lincoln焊接材料,全自动TIG焊打底,单丝SAW焊填充、盖面,并通过拉伸、侧弯、冲击、疲劳和裂纹尖端张开位移等焊接工艺评定试验,验证了X80隔水管单根主管环缝焊接方法、焊材、工艺参数等焊接工艺的合理性。应用该焊接工艺,研发出法兰式、快捷式两类长度15.24 m(50 ft)的隔水管单根主管。
Abstract:
In order to study the single main pipe girth welding process of X80 offshore drilling riser, based on the analysis of single main pipe material, service condition and welding method, the girth welding material and welding process of X80 riser are determined, that is, Lincoln welding material, automatic TIG welding backing, single wire SAW welding filling and capping are selected. Through the welding procedure qualification tests such as tensile test, side bending test, impact test, fatigue test and crack tip opening displacement, the rationality of welding procedure such as girth welding method for single main pipe of X80 riser, welding material and process parameters is verified. By using the welding technology, two types of riser pipes with flange and fast length of 15.24 m (50 ft) were developed.

参考文献/References:

[1] 孙宝江,曹式敬,李昊,等. 深水钻井技术装备现状及发展趋势[J]. 石油钻探技术,2011,39(2):8-15.

[2] 王定亚,李爱利. 海洋钻井隔水管系统配套技术研究[J]. 石油矿场机械,2010,39(7):12-15.
[3] 牛爱军,毕宗岳,牛辉,等. 国外深水钻井隔水管发展现状及主管性能分析[J]. 焊管,2015,38(9):6-11.
[4] 李妍,吴艳新,高德利. 深水钻井隔水管纵横弯曲变形解析[J]. 石油矿场机械,2011,40(7):21-24.
[5] 王进全,王定亚. 国外海洋钻井隔水管与国产化研究建议[J]. 石油机械,2009,37(9):147-150.
[6] 张占伟,王浩,肖存勇,等. 自保护药芯焊丝焊接X80管线钢管环焊缝接头的显微组织与力学性能[J]. 机械工程材料,2020,44(5):28-32.
[7] 赵焕宝,侯晓东,雷广进,等. 深水钻井隔水管疲劳试验载荷分析[J]. 石油矿场机械,2013,42(2):32-35.
[8] 顾纪清,阳代军. 管道焊接技术[M]. 北京:化学工业出版社,2005.
[9] 段斌,马德志. 现代焊接工程手册-基础卷[M]. 北京:化学工业出版社,2015.
[10] 全国石油钻采设备和工具标准化技术委员会. 海洋钻井隔水管装备规范: SY/T 6913—2012[S]. 北京:石油工业出版社,2013.
[11] 石油管材专业标准化技术委员会. 海洋隔水管用直缝埋弧焊管: SY/T 7027—2014[S]. 北京:石油工业出版社,2015.
[12] 李为卫,高琦,刘炜辰,等. 基于应变设计的高强钢管道环缝焊接技术[J]. 焊管,2020,43(5):59-62.
[13] 黄韵丹. 大口径长输天然气管道环焊缝问题及修复[J]. 化工管理,2021(11):126-127.
[14] 王志刚,靳海军,李义民,等. 12Cr2Mo1R板环缝焊接接头裂纹分析[J]. 中国化工装备,2020,22(6): 6-9,34.
[15] 周愿愿,袁桢棣,李晓庆,等. 壳体激光复合焊接设备设计与分析[J]. 机床与液压,2020,48(21):127-133.

相似文献/References:

[1]乔桂英,王 旭,付彦宏,等.加热温度和冷却速度对X80级弯管用钢组织与性能的影响[J].焊管,2008,31(6):15.[doi:1001-3938(2008)06-0015-04]
 QIAO Gui-ying,WANG Xu,FU Yan-hong,et al.Effects of Heat Temperature and Cooling Rate on Microstructure and Mechanical Properties of X80 Steel[J].,2008,31(7):15.[doi:1001-3938(2008)06-0015-04]
[2]孔君华,郑 琳,关 云,等.西气东输二线工程用18.4 mm厚 X80级热轧板卷生产实践[J].焊管,2008,31(6):50.[doi:1001-3938(2008)06-0050-04]
 KONG Jun-hua,ZHENG Ling,GUAN Yun,et al.Production Experience of X80 Grade Hot Rolled Coil with 18.4 mm Thickness Used〖JZ〗for the Second West to East Gas Pipeline Project[J].,2008,31(7):50.[doi:1001-3938(2008)06-0050-04]
[3]黄国建,张英慧,孔祥磊,等.特厚规格X70和X80级热轧卷板的开发与应用[J].焊管,2009,32(2):17.[doi:1001-3938(2009)02-0017-06]
 HUANG Guo-jian,ZHANG Ying-hui,KONG Xiang-lei,et al.Development and Application of X70 & X80 Grade HRC with Heavy Thickness[J].,2009,32(7):17.[doi:1001-3938(2009)02-0017-06]
[4]孙 奇,赵 波 编译.高应变时效抗力X80管线钢显微组织和力学性能[J].焊管,2011,34(8):63.
[5]付彦宏,白雷杰,彭立山,等.X80级DN 1 200 mm大规格等径异径三通的研发[J].焊管,2011,34(9):30.
[6]赵志伟,高振宇,付彦宏,等.西气东输二线工程用X80级φ1 219 mm感应加热弯管的研发[J].焊管,2012,35(2):5.[doi:1001-3938(2012)02-0005-05]
 ZHAO Zhi-wei,GAO Zhen-yu,FU Yan-hong,et al.The Development of X80 Grade φ1 219 mm Hot Induction Bend Used to the 2nd West-east Gas Pipeline Project[J].,2012,35(7):5.[doi:1001-3938(2012)02-0005-05]
[7]章传国,郑磊,张备,等.X80 大口径UOE焊管的开发和应用[J].焊管,2012,35(12):19.[doi:1001-3938(2012)12-0019-06]
 ZHENG Lei,ZHANG Chuanguo,ZHANG Bei,et al.Development and Application of X80 Large Diameter UOE Pipe[J].,2012,35(7):19.[doi:1001-3938(2012)12-0019-06]
[8]王泽恒,马国光,王艳华,等.基于BS 7910标准含埋藏裂纹缺陷X80长输管线的二级安全评定[J].焊管,2013,36(4):61.[doi:1001-3938(2013)04-0061-05]
 WANG Zeheng,MA Guoguang,WANG Yanhua,et al.Level 2 Safety Assessment for X80 Long-distance Transportation Pipeline with Embedded Crack Based on BS 7910 Standard[J].,2013,36(7):61.[doi:1001-3938(2013)04-0061-05]
[9]毕宗岳,牛爱军,牛 辉,等.国内外X80深水钻井隔水管主管性能对比[J].焊管,2013,36(11):5.[doi:1001-3938(2013)11-0005-05]
 BI Zongyue,NIU Aijun,NIU Hui,et al.Performance Comparison of Main Pipeline of X80 Deepwater Drilling Riser in Domestic and Overseas[J].,2013,36(7):5.[doi:1001-3938(2013)11-0005-05]
[10]马小芳 编译.GMAW焊接的HTP高铌X80管线钢管的纵向应变容量[J].焊管,2013,36(11):75.[doi:1001-3938(2013)11-0075-06]
 Edited and Translated by MA Xiaofang.Longitudinal Strain Capacity of GMAW Welded High Niobium (HTP) Grade X80 Steel Pipes[J].,2013,36(7):75.[doi:1001-3938(2013)11-0075-06]

备注/Memo

备注/Memo:
收稿日期:2021-02-04
基金项目: 国家高技术研究发展计划(863计划) “深水钻井隔水管系统技术研究”(项目编号2008AA09A106)。
作者简介:柳锁贤(1966—),男,工学学士,高级工程师,国际焊接工程师(IWE),主要从事石油钻采装备焊接工艺研究工作。
更新日期/Last Update: 2021-07-23