[1]王高峰,孙宝龙,王 飞,等.某输送管道金属损失缺陷成因分析[J].焊管,2021,44(7):35-39.[doi:10.19291/j.cnki.1001-3938.2021.07.007]
 WANG Gaofeng,SUN Baolong,WANG Fei,et al.Cause Analysis for Metal Loss Defect in Pipeline[J].,2021,44(7):35-39.[doi:10.19291/j.cnki.1001-3938.2021.07.007]
点击复制

某输送管道金属损失缺陷成因分析()
分享到:

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
第44卷
期数:
2021年第7期
页码:
35-39
栏目:
失效分析
出版日期:
2021-07-28

文章信息/Info

Title:
Cause Analysis for Metal Loss Defect in Pipeline
文章编号:
10.19291/j.cnki.1001-3938.2021.07.007
作者:
王高峰孙宝龙王 飞黄亮亮任国琪张 皓吴 峰徐 鹏
1. 中国石油集团石油管工程技术研究院,西安710077;
2. 国家石油天然气管网集团有限公司西气东输公司,上海 200120;
3. 国家石油天然气管网集团有限公司银川输气分公司,银川750001;
Author(s):
WANG Gaofeng SUN Baolong WANG Fei HUANG Liangliang REN GuoqiZHANG Hao WU Feng XU Peng
1. CNPC Tubular Goods Research Institute, Xi’an 710077, China;
2. PipeChina West East Gas Pipeline Company, Shanghai 200120, China;
3. PipeChina West East Gas Pipeline Company Yinchuan Branch, Yinchuan 750001, China
关键词:
金属损失熔敷金属电弧放电烧蚀损伤
Keywords:
metal loss deposited metals arc discharge ablation damage
分类号:
TG115.23
DOI:
10.19291/j.cnki.1001-3938.2021.07.007
文献标志码:
B
摘要:
为更好地掌握管道金属损失缺陷的形成原因,通过宏观分析、金相组织分析、X射线能谱分析以及XRD分析等手段,对某输送管道管体金属损失缺陷进行了分析。分析结果显示,缺陷横截面明显存在三个区域,即母材区、热影响区和熔敷金属区,熔敷金属区和母材区均以Fe、Mn、C元素为主,表明该管道缺陷是由于高温烧蚀损伤所致。此外,通过文献调研,对缺陷宏观表象进行了对比分析,明确了管道高温烧蚀损伤的具体热源,确定了该管金属损失缺陷为雷击电弧放电烧蚀损伤。
Abstract:
In order to find out the causes of metal loss defects in pipeline, the metal loss defects of a pipeline were analyzed by means of macroscopic analysis, metallographic structure analysis, X-ray energy spectrum analysis and X-ray diffraction analysis. The results show that there are three areas in the defect cross section, namely base metal area, heat affected area and deposited metal area. Fe, Mn and C are the main elements in the deposited metal area and base metal area, which indicates that the defect is caused by high temperature ablation damage. In addition, through literature research, the macroscopic appearance of defects is analyzed, and the specific heat source of high temperature ablation damage is defined, and the metal loss defect of the pipe is determined as the damage caused by lightning arc discharge ablation damage.

参考文献/References:

[1] 机械工业理化检验人员技术培训和资格鉴定委员会. 金相检验[M]. 上海:上海科学普及出版社,2003:29-33.

[2] 高惠临. 管线钢与管线钢管[M]. 北京:中国石化出版社,2012:78-82.
[3] 赵立秀. 一种煤气管道漏点的安全封堵结构:CN207990214U[P]. 2018-10-19.
[4] 杨显丽. 介绍一种新型粘接剂——速成钢[J]. 中国设备管理,1998(5):3-5.
[5] 韩清珊. 浅析如何处理湿式螺旋煤气柜的漏点[J]. 企业技术开发,2012,31(2):172-173.
[6] 王长安,王高峰,余国民,等. 管道环焊缝附近母材缺陷剖析[J]. 压力容器,2017,34(7):50-55.
[7] 聂向晖,徐斌,许彦,等. X60M螺旋焊管泄露原因分析[J]. 焊管,2020,43(1):20-25.
[8] 糜翔,肖中男. 雷击导致圆钢损伤的试验研究[J]. 建筑电气,2015,34(4):45-50.
[9] 覃彬全,李良福,杨磊,等. 雷击电弧放电对桥梁缆索的影响研究[C]//第31届中国气象学会年会第十二届防雷减灾论坛——雷电物理防雷新技术. 北京:中国气象学会,2014:9.
[10] 糜翔,杨磊,刘青松,等. 雷击圆钢试验研究[C]//第32届中国气象学会年会第十三届防雷减灾论坛——雷电物理和防雷新技术. 北京:中国气象学会,2015:10.

相似文献/References:

[1]张敏,赵鹏康,毕宗岳,等.X80管线钢用气体保护焊丝的研制[J].焊管,2010,33(10):23.[doi:1001-3938(2010)10-0023-06]
 ZHANG Min,ZHAO Peng-kang,BI Zong-yue,et al.Development of Gas-shielded Welding Wire for X80 Pipeline Steel[J].,2010,33(7):23.[doi:1001-3938(2010)10-0023-06]
[2]李为卫,李嘉良,梁明华,等.热输入量对熔化极气体保护焊焊缝强韧性的影响[J].焊管,2021,44(4):1.[doi:10.19291/j.cnki.1001-3938.2021.04.001]
 LI Weiwei,LI Jialiang,LIANG Minghua,et al.Effect of Heat Input on Strength and Toughness of GMAW Weld[J].,2021,44(7):1.[doi:10.19291/j.cnki.1001-3938.2021.04.001]

备注/Memo

备注/Memo:
收稿日期:2021-04-07
作者简介:王高峰(1981—),男,高级工程师,国家注册设备监理师,美国焊接检验师(CWI),主要从事油气输送管道性能研究及管道完整性管理方面的工作。
更新日期/Last Update: 2021-07-26