[1]王彦坤,段莉蕾.法兰密封面全位置TIG自动焊接设备及工艺[J].焊管,2022,45(11):47-51.[doi:10.19291/j.cnki.1001-3938.2022.11.008]
 WANG Yankun,DUAN Lilei.All-position TIG Automatic Welding Equipment and Process of Flange Sealing Surface[J].,2022,45(11):47-51.[doi:10.19291/j.cnki.1001-3938.2022.11.008]
点击复制

法兰密封面全位置TIG自动焊接设备及工艺()
分享到:

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
45
期数:
2022年第11期
页码:
47-51
栏目:
工艺与设备
出版日期:
2022-11-28

文章信息/Info

Title:
All-position TIG Automatic Welding Equipment and Process of Flange Sealing Surface
文章编号:
10.19291/j.cnki.1001-3938.2022.11.008
作者:
王彦坤段莉蕾
一重集团大连核电石化有限公司技术中心, 辽宁 大连 116113
Author(s):
WANG Yankun DUAN Lilei
Technology Center, CFHI Dalian Nuclear Power Petrochemical Co., Ltd., Dalian 116113, Liaoning, China
关键词:
法兰密封面全位置焊接TIG焊焊接设备焊接工艺
Keywords:
flange sealing surface all-position welding TIG weldingwelding equipment welding process
分类号:
TG444.74
DOI:
10.19291/j.cnki.1001-3938.2022.11.008
文献标志码:
B
摘要:
在加氢反应器法兰密封面耐蚀层堆焊过程中,采用传统手工焊接的方法会存在焊接质量不稳定、后期加工困难和周期长等问题。针对这一问题,设计了一种法兰密封面全位置TIG自动堆焊设备,通过电气控制实现了焊接自动移距换道和变径后焊接速度的恒定,并且全位置最多可分为24个焊接区域,通过调节不同区域焊接工艺参数,能够使整个密封面获得合格的焊接质量和成形良好的堆焊层,并且焊接工艺评定结果满足技术要求。
Abstract:
In the process of surfacing process the corrosion-resistant layer of the flange sealing surface of the hydrogenation reactor, the traditional manual welding method has problems, such as unstable welding quality, difficult post-processing and long cycle. In view of this problem, a full-position TIG automatic surfacing equipment for flange sealing surface is designed. Through electrical control, the welding speed can be automatically shifted and the welding speed is constant after changing the diameter, and the whole position can be divided into up to 24 welding areas. Adjusting the welding process parameters in different areas can make the whole sealing surface obtain qualified welding quality and well-formed surfacing layer, and the welding process evaluation results can meet the technical requirements.

参考文献/References:

[1] 郭春富,孙伟强,刘帛炎,等. 管道全位置自动焊的研究现状及展望[J]. 电焊机,2017,47(11):77-81.[2] 张丽丽. 石油化工工程自动化焊接技术的应用现状和发展趋势[J]. 石油化工建设,2021,43(S1):32-35.[3] 刘坤. 管道全位置熔化极氩弧自动焊施工技术探索[J]. 焊接技术,2020,49(5):57-58.[4] 温灿华. TIG焊接技术在不锈钢平焊法兰中的应用[J]. 模具制造,2013,13(6):74-76.[5] 孟庆伟,邸晓峰,杨云兰,等. 一种快开盲板端法兰密封面自动化堆焊机组[J]. 石油化工设备,2019,48(6):53-56.[6] 李东洁,李潜,王世伟,等. 全位置相贯线自动焊接新型焊枪设计[J]. 焊接学报,2018,39(3):117-119,123,134.[7] 蒋庆梅,张小强,杨建中. 法兰密封面热丝TIG堆焊设备的适用性分析[J]. 焊接技术,2017,46(3):53-55.[8] 李竹渊,曹冬巍,潘国伟,等. 核电站主管道全位置自动焊工艺研究与应用[J]. 焊接技术,2018,47(5):77-79.[9] 刘金平,侯阳,张晓冬,等. 核电水池不锈钢覆面预制TIG自动焊技术研究[J]. 金属加工(热加工),2022(2):11-13.[10] 刘文吉,李亮玉,岳建锋,等. 重力对全位置TIG焊熔池温度场与流场影响的有限元分析[J]. 焊接学报,2015,36(3):76-79,84.[11] 潘平伟,蔡黎明,王坤,等. 一种脐带缆用S32750钢管单元全位置脉冲TIG焊接工艺研究[J]. 焊管,2018,41(10):14-17.[12] 刘宏博,刘彦明,杨战利,等. 起焊位置对连续油管全位置自动焊焊缝成形的影响[J]. 焊管,2019(12):33-39,50.[13] 王维亮,余晗,宋红兵,等. 连续管全位置自动对接焊工艺和接头性能研究[J]. 焊管,2017,40(8):19-22,32.[14] 徐祥久,张宇,黄超,等. SA-335 P91钢全位置窄间隙热丝TIG焊接工艺及接头性能研究[J]. 压力容器,2019,36(8):12-15,32.[15] 顾伟,皇甫乐森,赵勇,等. 316L不锈钢厚壁管全位置TIG焊接头组织及性能[J]. 焊接技术,2018,47(11):14-16.

备注/Memo

备注/Memo:
收稿日期:2022-02-18作者简介:王彦坤(1988—),男,硕士,工程师,主要从事自动化焊接设备的研制和焊接工艺开发。
更新日期/Last Update: 2022-11-22