[1]胡志强,熊翔宇,宋洋,等.天然气管道间接检测技术及应用[J].焊管,2023,46(2):25-31.[doi:10.19291/j.cnki.1001-3938.2023.02.005]
 HU Zhiqiang,XIONG Xiangyu,SONG Yang,et al.Application of Natural Gas Pipeline Indirect Detection Technique[J].,2023,46(2):25-31.[doi:10.19291/j.cnki.1001-3938.2023.02.005]
点击复制

天然气管道间接检测技术及应用()
分享到:

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
46
期数:
2023年第2期
页码:
25-31
栏目:
应用与开发
出版日期:
2023-02-28

文章信息/Info

Title:
Application of Natural Gas Pipeline Indirect Detection Technique
文章编号:
10.19291/j.cnki.1001-3938.2023.02.005
作者:
胡志强熊翔宇宋洋王兴见刘乐乐
1. 中石化西南油气分公司彭州气田(海相)开发项目部,成都 610000; 2. 中石化西南油气分公司油气销售中心,四川 德阳 618000; 3. 西安交通工程学院 机械与电气工程学院,西安 710030
Author(s):
HU Zhiqiang XIONG Xiangyu SONG Yang WANG Xingjian LIU Lele
1. Pengzhou Gas Field (Marine) Development Project Department, Sinopec Southwest Oil and Gas Branch, Chengdu 610000, China; 2. Oil and Gas Sales Centre, Sinopec Southwest Oil and Gas Branch, Deyang 618000, Sichuan, China; 3. School of Mechanical and Electrical Engineering, Xi’an Traffic Engineering Institute, Xi’an 710030, China
关键词:
管道间接检测技术PCM检测ACVG检测DCVG检测
Keywords:
pipeline indirect detection technology PCM detection ACVG detection DCVG detection
分类号:
TG115.28
DOI:
10.19291/j.cnki.1001-3938.2023.02.005
文献标志码:
B
摘要:
为了预防天然气管道发生腐蚀后引发泄漏等一系列安全事故,对管道开展周期性检测工作可以及时发现缺陷并采取修复、补强等措施。对比了目前常见的几种管道间接检测技术原理及其优缺点,并分别采用多频管中电流检测(PCM)、交流地电位梯度检测(ACVG)、直流地电位梯度法(DCVG)对一条Φ273 mm埋地钢制管道进行检测和开挖验证。结果表明,DCVG和ACVG检测法对管道外防腐层破损点定位的精确性和准确度最高,因此在对埋地钢制管道进行外腐蚀检测过程中,建议优先选用这两种方法对管道外防腐层进行破损点检测,同时尽可能缩小测试间距,减少大缺陷产生的电位梯度的影响,提高检测精度。
Abstract:
In order to prevent a series of safety accidents such as leakage and even explosion caused by corrosion of natural gas pipelines, periodic inspection of pipelines can be carried out to find defects in time and take measures such as repair and reinforcement. The principles of indirect detection technologies of PCM, ACVG and DCVG and the application in a gas field are compared, and three detection methods are used to detect and verify the excavation of Φ273 mm buried steel pipeline. The results show that DCVG and ACVG detection methods have the highest accuracy in locating the damaged points of the external coating of the pipeline. Therefore, in the process of external corrosion detection of buried steel pipelines, it is recommended to give priority to these two methods to detect the damaged points of the external anti?orrosion coating of the pipeline, while reducing the test spacing, and the effect of potential gradient generated by large defects, improve the detection accuracy.

参考文献/References:

[1] 王炳辉. PCM检测仪对油田管道防腐层破损点的检测[J]. 石化技术, 2019, 26(3): 147.[2] 冯强, 邓勇刚, 李燕, 等. 油气处理厂埋地管道PCM检测的电流控制方法[J]. 无损检测, 2018, 40(5): 72-75.[3] 许忠耿. 长输管道外防腐层质量检查中PCM的应用与分析[J]. 当代化工研究, 2017(12): 38-39.[4] 和宏伟, 白冬军, 冯文亮. 环境因素对ACVG法防腐层检测的影响[J]. 煤气与热力, 2015, 35(12): 32-36.[5] 陈德胜, 龙媛媛, 王遂平, 等. DCVG+CIPS技术在净化油长输管道外检测中的应用[J]. 油气储运, 2012, 31(8): 615-616,647.[6] 车飞, 高海霞, 刘新鄂, 等. ACVG、DCVG技术在输气管道外检测中的应用[J]. 管道技术与设备, 2011(3): 51-53.[7] 李自力, 谢跃辉, 郝宏娜, 等. 埋地管道阴极保护电位测量方法研究进展[J]. 腐蚀与防护, 2012, 33(1): 55-59.[8] 刘旭. CIPS技术在天然气长输管道外检测中的应用[J]. 大众标准化, 2018(6): 34-36.[9] 张维景, 胡博, 于润桥, 等. 埋地管道腐蚀的瞬变电磁法检测探头优化设计[J]. 仪表技术与传感器, 2016(12): 37-40,68.[10] 王浩, 石伟, 焦小兵, 等. 低频导波检测在埋地管道穿越段处管体缺陷检测中的应用[C]//第十五届宁夏青年科学家论坛石化专题论坛论文集. 银川:宁夏石油学会,2019: 297-299.[11] 何文, 王成, 石文芳, 等. 锚杆锚固质量的超声导波检测技术研究[J]. 北京理工大学学报, 2017, 37(6): 567-572,578.[12] 张丰, 赵晋云, 吴晓宁, 等. 埋地管道外检测方法的组合应用与验证[J]. 油气储运, 2009, 28(8): 35-37,79.[13] 徐代英, 禹继贫. 输气管线绝缘防腐层缺陷检测及应用[J]. 天然气工业, 2000(5): 98-99.[14] 庞旭, 朱平, 张丹威. CIPS+DCVG在高原埋地管道外防腐层检测应用[J]. 价值工程, 2018, 37(8): 195-197.[15] 金小军, 董训长, 张扬. 埋地钢管外防腐层腐蚀检测方法及应用[J]. 油气储运, 2001(7): 34-35,58.

相似文献/References:

[1]张晓存,薛继军.埋地输气管线腐蚀综合评价[J].焊管,2015,38(1):66.[doi:1001-3938(2015)01-0066-03]
 ZHANG Xiaocun,XUE Jijun.Comprehensive Assessment for the Corrosion of Buried Gas Pipeline[J].,2015,38(2):66.[doi:1001-3938(2015)01-0066-03]

备注/Memo

备注/Memo:
收稿日期:2022-07-08作者简介:胡志强(1994—),男,硕士研究生,研究方向为天然气管道腐蚀与防护。
更新日期/Last Update: 2023-02-22