[1]袁雪婷,李银山,臧伟,等.2205双相不锈钢在增材制造和热处理过程中组织和力学性能的变化[J].焊管,2023,46(11):58-68.[doi:10.19291/j.cnki.1001-3938.2023.11.010]
　Translated by YUAN Xueting,LI Yinshan,ZANG Wei,et al.Evolution of Microstructure and Mechanical Properties of 2205 Duplex Stainless Steel during Additive Manufacturing and Heat Treatment[J].,2023,46(11):58-68.[doi:10.19291/j.cnki.1001-3938.2023.11.010]
点击复制

2205双相不锈钢在增材制造和热处理过程中组织和力学性能的变化()
分享到：

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
46
期数:
2023年第11期
页码:
58-68
栏目:
国外焊管
出版日期:
2023-11-19

文章信息/Info

Title:
Evolution of Microstructure and Mechanical Properties of 2205 Duplex Stainless Steel during Additive Manufacturing and Heat Treatment
文章编号:
10.19291/j.cnki.1001-3938.2023.11.010
作者:
袁雪婷; 李银山; 臧伟; 郭克星; 马璇; 董超 编译
（1. 中油国家石油天然气管材工程技术研究中心有限公司，西安710018； 2. 中国石油宝鸡石油钢管有限责任公司，陕西 宝鸡721008； 3. 陕西省高性能连续管重点实验室，陕西 宝鸡721008）
Author(s):
Translated by YUAN Xueting;  LI Yinshan;  ZANG Wei;  GUO Kexing;  MA Xuan;  DONG Chao
(1. Chinese National Engineering Research Center for Petroleum and Natural Gas Tubular Goods Co., Ltd., Xi’an 710018, China; 2. CNPC Baoji Petroleum Steel Pipe Co., Ltd., Baoji 721008, Shaanxi, China; 3. Shaanxi Province Key Laboratory of High Performance Coiled Tubing, Baoji 721008, Shaanxi, China)
关键词:
2205双相不锈钢; 增材制造; 热处理; 激光粉末床熔合; 微观结构; 力学性能
Keywords:
2205 duplex stainless steel;  additive manufacturing;  heat treatment;  laser powder bed fusion;  microstructure;  mechanical properties
分类号:
TG142.71
DOI:
10.19291/j.cnki.1001-3938.2023.11.010
文献标志码:
B
摘要:
为了研究激光粉末床熔合（LPBF）过程中双相不锈钢的固态相变和力学性能的变化规律，采用电子背散射衍射（EBSD）、电子探针（EPMA）、扫描电子显微镜（SEM）、透射电子显微镜（TEM）、原子探针层析技术（APT）和力学性能测试等方法对材料性能进行了表征。结果显示，采用LPBF技术制备的双相不锈钢（DSS）组织多为铁素体，柱状铁素体晶粒沿BD方向生长，具有很强的织构，相比于常规制造DSS屈服强度和极限抗拉强度得到了较大程度的提升，但延性下降。对采用LPBF技术加工的2205双相不锈钢进行1 000 ℃退火处理后，组织可恢复到相平衡状态，塑性得到明显提高，-110 ℃时表现出优良的冲击韧性。此外，LPBF试样具有较高的强度和较低的塑性，这主要是因为铁素体组织中的N过饱和度更高，形成的Cr2N颗粒较多，因而位错密度较大，热处理后，细小的奥氏体晶粒弥散分布在铁素体基体中，在塑性变形时形成孪晶并导致位错塞积，从而抑制铁素体发生塑性变形，使材料具备较大的塑性变形容限。
Abstract:
In order to study the solid phase transformation and mechanical properties of duplex stainless steel during laser powder bed fusion (LPBF), the material properties were characterized by using methods such as electron backscatter diffraction (EBSD), electron probe microanalysis (EPMA), scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic probe tomography (APT), and mechanical properties testing. The results show that the microstructure of DSS prepared using LPBF technology is mostly ferrite, and columnar ferrite grains grow along the BD direction with strong texture. Compared with conventional manufacturing DSS, the yield strength and ultimate tensile strength have been greatly improved, but the ductility has decreased. After annealing at 1 000 ℃, the microstructure of 2205 duplex stainless steel processed using LPBF technology can be restored to its phase equilibrium state, and the plasticity is significantly improved. It exhibits excellent impact toughness at -110 ℃. In addition, the LPBF sample has higher strength and lower plasticity, mainly due to the higher supersaturation of N in the ferrite structure, resulting in more Cr2N particles and higher dislocation density. After heat treatment, fine austenite grains are dispersed in the ferrite matrix, forming twinning during plastic deformation and leading to dislocation accumulation, thereby inhibiting plastic deformation of the ferrite and providing the material with a greater plastic deformation tolerance.

参考文献/References:

译自：HAGHDADI N，LEDERMUELLER C，CHEN H，et al.Evolution of microstructure and mechanical properties in 2205 duplexstainless steels during additive manufacturing and heat treatment［J］. Materials Science & Engineering A，2022（835）：142695.

相似文献/References:

[1]张立君,张燕飞,郭崇晓.2205双相不锈钢双金属复合管焊接工艺研究[J].焊管,2009,32(4):30.[doi:1001－3938（2009）04－0030－05]
　ZHANG Li-jun,ZHANG Yan-fei,GUO Chong-xiao.Welding Procedure Research on 2205 Duplex Stainless Steel Bimetal Pipe[J].,2009,32(11):30.[doi:1001－3938（2009）04－0030－05]
[2]赵国仙,杜航波,祝恒倩.模拟地面集输环境下温度对2205双相钢均匀腐蚀及点蚀行为的影响[J].焊管,2020,43(2):1.[doi:10.19291/j.cnki.1001-3938.2020.02.001]
　ZHAO Guoxian,DU Hangbo,ZHU Hengqian.Effect of Temperature on Uniform Corrosion and Pitting Behavior of 2205 Duplex Stainless Steel in Simulated Ground Gathering and Transportation Environment[J].,2020,43(11):1.[doi:10.19291/j.cnki.1001-3938.2020.02.001]
[3]冯玉兰,李 睿.不同焊接工艺下2205双相不锈钢焊缝组织及性能对比[J].焊管,2020,43(9):10.[doi:10.19291/j.cnki.1001-3938.2020.09.003]
　FENG Yulan,LI Rui.Comparison of Microstructure and Properties of 2205 Duplex Stainless Steel Welds with Different Welding Processes[J].,2020,43(11):10.[doi:10.19291/j.cnki.1001-3938.2020.09.003]
[4]李博锋,杨 光,袁 宝,等.小直径2205双相不锈钢管对接焊接头组织与性能研究[J].焊管,2021,44(2):7.[doi:10.19291/j.cnki.1001-3938.2021.02.002]
　LI Bofeng,YANG Guang,YUAN Bao,et al.Microstructure and Properties of Butt Welding Joint of Small Diameter 2205 Duplex Stainless Steel Pipe[J].,2021,44(11):7.[doi:10.19291/j.cnki.1001-3938.2021.02.002]
[5]汪海涛,毕宗岳,赵 勇,等.2205双相不锈钢连续管耐蚀性能分析[J].焊管,2021,44(6):1.[doi:10.19291/j.cnki.1001-3938.2021.06.001]
　WANG Haitao,BI Zongyue,ZHAO Yong,et al.Analysis of Corrosion Resistance of 2205 Duplex Stainless Steel Coiled Tubing[J].,2021,44(11):1.[doi:10.19291/j.cnki.1001-3938.2021.06.001]
[6]符成学,雷小伟,贾晓飞,等.钛合金激光增材制造技术研究与应用进展[J].焊管,2023,46(8):11.[doi:10.19291/j.cnki.1001-3938.2023.08.002]
　FU Chengxue,LEI Xiaowei,JIA Xiaofei,et al.Research and Application Progress of Titanium Alloy Laser Additive Manufacturing Technology[J].,2023,46(11):11.[doi:10.19291/j.cnki.1001-3938.2023.08.002]
[7]徐阿敏,吉海,许全光,等.焊接热输入量和保护气体成分对S32205双相不锈钢低温冲击韧性的影响[J].焊管,2024,47(4):25.[doi:10.19291/j.cnki.1001-3938.2024.04.004]
　XU Amin,JI Hai,XU Quanguang,et al.Effect of Welding Heat Input and Shielding Gas Composition on Low Temperature Impact Toughness of S32205 Duplex Stainless Steel[J].,2024,47(11):25.[doi:10.19291/j.cnki.1001-3938.2024.04.004]

备注/Memo

备注/Memo:
收稿日期：2022-09-26译者简介：袁雪婷（1988—）， 女， 工程师， 硕士， 主要从事油气管材开发及焊接技术研究。
更新日期/Last Update: 2023-11-27