相似文献/References:
[1]杜伟,娄琦,黄磊,等.管线钢JCOE制管前后力学性能变化分析[J].焊管,2010,33(5):20.[doi:1001－3938（2010）05－0020－04]
DU Wei,LOU Qi,HUANG Lei,et al.Analysis on Mechanical Properties Variation of Pipeline Steel Before and After JCOE Process[J].,2010,33(3):20.[doi:1001－3938（2010）05－0020－04]
[2]张 备,杨剑峰,王 波.南海荔湾X70和X65大壁厚海洋管线的开发与应用研究[J].焊管,2013,36(9):30.[doi:１００１－３９３８（２０１3）09-0030-08]
ZHANG Bei,YANG Jianfeng,WANG Bo.Development and Application of Heavy Wall ThicknessX70 &X65 Submarine Pipeline Steel in the South China Sea′ Li Wan[J].,2013,36(3):30.[doi:１００１－３９３８（２０１3）09-0030-08]
[3]黄卫锋,张 备,郑 磊,等.厚壁UOE海底管线管的开发实践[J].焊管,2014,37(8):34.[doi:１００１－３９３８（２０１4）08-0034-07]
HUANG Weifeng,ZHANG Bei,ZHENG Lei,et al.Development Experience of Thick Wall UOE Submarine Line Pipe[J].,2014,37(3):34.[doi:１００１－３９３８（２０１4）08-0034-07]
[4]杨社民 编译.X120M管线钢管的JCOE制造技术[J].焊管,2014,37(8):68.[doi:１００１－３９３８（２０１4）08-0068-05]
Edited and Translated by Yang Shemin.Formation of X120M Line Pipe Through JCOE Technique[J].,2014,37(3):68.[doi:１００１－３９３８（２０１4）08-0068-05]
[5]杨剑峰,张 备,郭 胜,等.基于时间序列模型的UOE焊管生产过程多目标优化[J].焊管,2015,38(3):29.[doi:１００１－３９３８（２０１5）03-0029-09]
YANG Jianfeng,ZHANG Bei,GUO Sheng,et al.Multi-objective Optimization of UOE Welded Pipe Production Process Based on Time Series Model[J].,2015,38(3):29.[doi:１００１－３９３８（２０１5）03-0029-09]
[6]徐 刚,边 晋,葛玉红,等.JCOE焊管扩径后椭圆度的控制与改进[J].焊管,2015,38(7):38.[doi:１００１－３９３８（２０１5）07-0038-06]
XU Gang,BIAN Jin,GE Yuhong,et al.Control and Improvement for Ovality of JCOE Pipe after Expanding[J].,2015,38(3):38.[doi:１００１－３９３８（２０１5）07-0038-06]
[7]谢仕强,王 波,黄卫锋,等.特殊需求UOE管线管的开发及应用[J].焊管,2016,39(4):27.[doi:10.19291/j.cnki.1001-3938.2016.04.007]
XIE Shiqiang,WANG Bo,HUANG Weifeng,et al.Development and Application of UOE Line Pipe for Special Requirements[J].,2016,39(3):27.[doi:10.19291/j.cnki.1001-3938.2016.04.007]
[8]孙 宏,田 鹏,宗秋丽,等.低热输入多丝埋弧焊工艺研究[J].焊管,2016,39(4):65.[doi:10.19291/j.cnki.1001-3938.2016.04.014]
Translated by SUN Hong,TIAN Peng,ZONG Qiuli,et al.Research for Multiple-electrode Submerged Arc Welding Process with Low Heat Input[J].,2016,39(3):65.[doi:10.19291/j.cnki.1001-3938.2016.04.014]
[9]黄 杰,徐根涛.UOE机组预弯边机夹紧梁快速油缸故障分析及处理[J].焊管,2017,40(8):58.[doi:10.19291/j.cnki.1001-3938.2017.08.012]
HUANG Jie,XU Gentao.Analysis and Treatment for Rapid Oil Cylinder Failure of UOE Unit Pre-bending Machine Clamping Beam[J].,2017,40(3):58.[doi:10.19291/j.cnki.1001-3938.2017.08.012]
[10]张洪坤,孟庆军,杨超雄.JCOE钢管生产线精整横移台车运行故障分析及改进[J].焊管,2023,46(4):55.[doi:10.19291/j.cnki.1001-3938.2023.04.009]
ZHANG Hongkun,MENG Qingjun,YANG Chaoxiong.Analysis and Improvement of Operation Fault of the Finishing Transferring Vehicles in JCOE Steel Pipe Production Line[J].,2023,46(3):55.[doi:10.19291/j.cnki.1001-3938.2023.04.009]