[1]林海威,刘 明,王 荣,等.X80管线钢管在5%NaCl+0.5%醋酸溶液中的腐蚀行为研究[J].焊管,2013,36(10):16-21.[doi:1001-3938(2013)10-0016-06]
 LIN Haiwei,LIU Ming,WANG Rong,et al.Study on Corrosion Behavior of X80 Pipeline Steel in 5%NaCl+0.5% Acetum[J].,2013,36(10):16-21.[doi:1001-3938(2013)10-0016-06]
点击复制

X80管线钢管在5%NaCl+0.5%醋酸溶液中的腐蚀行为研究
分享到:

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
36
期数:
2013年第10期
页码:
16-21
栏目:
试验与研究
出版日期:
2013-10-28

文章信息/Info

Title:
Study on Corrosion Behavior of X80 Pipeline Steel in 5%NaCl+0.5% Acetum
文章编号:
1001-3938(2013)10-0016-06
作者:
林海威刘 明王 荣杨爱民
(西安石油大学 材料科学与工程学院,西安 710065)
Author(s):
LIN HaiweiLIU MingWANG RongYANG Aimin
(School of Materials Science and Engineering,Xi’an Shiyou University,Xi’an 710065,China)
关键词:
管线钢开路电位动电位极化电化学阻抗谱浸泡试验
Keywords:
pipeline steelopen circuit potentialpotentiodynamic polarizationelectrochemical impendence spectroscopy immersion test
分类号:
TE988.2
DOI:
1001-3938(2013)10-0016-06
文献标志码:
A
摘要:
应用动电位极化、电化学阻抗谱和浸泡试验方法研究了X80管线钢管母材和焊缝试样在5%NaCl+0.5%醋酸溶液中的腐蚀行为。结果表明,焊缝试样的开路电位较母材负移,在电化学腐蚀过程中,母材和焊缝区的腐蚀过程受活化极化控制,焊缝区具有较高的腐蚀速率。母材和焊缝的电化学阻抗谱均具有两个时间常数,母材极化电阻值大于焊缝区。在浸泡试样中,随着浸泡时间的延长平均腐蚀速率逐渐下降,但焊缝区产生严重的选择性腐蚀现象。
Abstract:
The corrosion behavior of X80 pipeline steel base metal and weld specimens were studied by potentiodynamic polarization,electrochemical impendence spectroscopy and immersion test in 5%NaCl+0.5% acetum. The result showed that the open circuit potential of the weld sample is more positive than the base metal sample. The process of electrochemical corrosion is activation-controlled and the weld sample is with a high corrosion rate. The electrochemical impendence spectroscopy presents two time constants,the polarization resistance of base metal is higher than that of weld joint. The average corrosion rate from the immersion test decreases gradually with the immersion time increasing, but serious selective corrosion appear on the weld zone.

参考文献/References:

[1] 陈翠欣,李午申,王庆鹏,等. X80管线钢焊接粗晶区韧化因素的研究[J]. 材料工程,2005(05):22-26.
[2] 徐向红. 焊缝区选择性腐蚀及其防护措施[J]. 新疆大学学报,2002(S1):12-13.
[3] Bi Z Y,WANG R,JING X T. Grooving Corrosion of Oil Coiled Tubes Manufactured by Electrical Resistance Welding[J]. Corrosion Science,2012,57(04):67-73.
[4] WANG R,LUO S J. Grooving Corrosion of Electric-resistance-
welded Oil Well Casing of J55 Steel[J]. Corrosion Science,2013,68(03):119-127.
[5] 毕宗岳,刘道新,李轩,等. 热处理对ERW焊缝沟槽腐蚀敏感行为的影响[J]. 材料热处理学报,2011,32(02):48-53.
[6] 王荣. J55钢直缝焊油井套管沟槽腐蚀性能研究[J]. 中国腐蚀与防护学报,2004,24(06):360-363.
[7] 高惠临. 管线钢与管线钢管[M]. 北京:中国石化出版社, 2011:196-197.
[8] ROCCHINI G. Evaluation of the Electrochemical Parame-
ters by Means of Series Expansion[J]. Corrosion Science,1994,36(08):1347-1361.
[9] 宋诗哲. 腐蚀电化学研究方法[M]. 北京:化学工业出版社,1988:120-122.
[10]MACDONALD J R. Impedance Spectroscopy[J]. Annals of Biomedical Engineering,1992(20):289-305.
[11]SOBRAL A V C,RISTOW JR W,AZAMBUJIA D S,et al. Potentiodynamic Tests and Electrochemical Impedance Spectroscopy of Injection Molded 316L Steel in NaCl Solution[J]. Corrosion Science,2001,43(06):1019-1030.[12]曹楚南,张鉴清. 电化学阻抗谱导论[M]. 北京:科学出版社,2002:26.
[13]ZHANG X,PEHKONEN S O,KOCHERGINSKY N,et al.Copper Corrosion in Mildly Alkaline Water with the Di-
sinfectant Monochloramine[J]. Corrosion Science,2002,44(11):2507.
[14]NACE RP0775—2005,Preparation Installation,Analysis,and Interpretation of Corroison coupons in Oilfield Oper-
ations[S].
[15]刘成虎,柳伟,赵耀斌,等. X70异种钢焊接接头的电偶腐蚀行为[J]. 北京科技大学学报,2008,30(01):25-29.

相似文献/References:

[1]李新华,罗金恒,赵新伟,等.高钢级管线钢失效评估曲线研究[J].焊管,2007,30(4):33.[doi:1001-3938(2007)04-0033-03]
 LI Xin-hua,LUO Jin-heng,ZHAO Xin-wei,et al.Research on Failure Assessment Curves of High Grade Pipeline Steel[J].,2007,30(10):33.[doi:1001-3938(2007)04-0033-03]
[2]宫少涛,王爱民,吉玲康,等.X80与X100级管线钢屈服强度Rt 0.5与Rp 0.2的差异性研究[J].焊管,2007,30(5):42.[doi:1001-3938(2007)05-0042-03]
 GONG Shao-tao,WANG Ai-min,JI Ling-kang,et al.Study on Difference Between Yield Strength Rt 0.5 and Rp 0.2 for X80 and X100 Pipelines Steel[J].,2007,30(10):42.[doi:1001-3938(2007)05-0042-03]
[3]刘庆才,李 东,黎剑锋.影响输气管线钢管抗H2S性能主要因素的探讨[J].焊管,2007,30(5):54.[doi:1001-3938(2007)05-0054-05]
 LIU Qing-cai,LI Dong,LI Jian-feng.Key Factors Affecting Sour Service Ability of Welded Pipe and Its Domestic Production[J].,2007,30(10):54.[doi:1001-3938(2007)05-0054-05]
[4]王树人,崔志新.管线钢落锤撕裂试验异常脆性断口分析[J].焊管,2007,30(6):69.[doi:1001-3938(2007)06-0069-03]
 WANG Shu-ren? CUI Zhi-xin.Analysis on Abnormal Brittle Fracture of DWTT for Pipeline Steel[J].,2007,30(10):69.[doi:1001-3938(2007)06-0069-03]
[5]陶 鹏,张 弛,杨志刚,等.高钢级管线钢的组织和力学性能[J].焊管,2008,31(2):19.[doi:1001-3938(2008)02-0019-04]
 TAO Peng,ZHANG Chi,YANG Zhi-gang,et al.The Microstructure and Mechanical Property of X70,X80 and X100 Grade Pipeline Steel[J].,2008,31(10):19.[doi:1001-3938(2008)02-0019-04]
[6]黄明浩,徐 烽,黄国建.影响管线钢屈强比的因素探讨[J].焊管,2008,31(3):20.[doi:1001-3938(2008)03-0020-04]
 HUANG Ming-hao,XU Feng,HUANG Guo-jian.Discussion on Influencing Factors of Yield Ratio for Pipeline Steel[J].,2008,31(10):20.[doi:1001-3938(2008)03-0020-04]
[7]牛 辉,余大涛,高惠临.管线钢焊接热影响区的组织预测[J].焊管,2008,31(3):28.[doi:1001-3938(2008)03-0028-05]
 NU Hui,YU Da-tao,GAO Hui-lin.Structure Forecast of Pipeline Steel Welding Heat Affected Zone[J].,2008,31(10):28.[doi:1001-3938(2008)03-0028-05]
[8]孔君华,郑 琳,关 云,等.西气东输二线工程用18.4 mm厚 X80级热轧板卷生产实践[J].焊管,2008,31(6):50.[doi:1001-3938(2008)06-0050-04]
 KONG Jun-hua,ZHENG Ling,GUAN Yun,et al.Production Experience of X80 Grade Hot Rolled Coil with 18.4 mm Thickness Used〖JZ〗for the Second West to East Gas Pipeline Project[J].,2008,31(10):50.[doi:1001-3938(2008)06-0050-04]
[9]黄国建,张英慧,孔祥磊,等.特厚规格X70和X80级热轧卷板的开发与应用[J].焊管,2009,32(2):17.[doi:1001-3938(2009)02-0017-06]
 HUANG Guo-jian,ZHANG Ying-hui,KONG Xiang-lei,et al.Development and Application of X70 & X80 Grade HRC with Heavy Thickness[J].,2009,32(10):17.[doi:1001-3938(2009)02-0017-06]
[10]杨专钊,李云龙,邓波,等.管线钢拉伸试验中异常屈服强度研究与分析[J].焊管,2009,32(4):51.[doi:1001-3938(2009)04-0051-03]
 YANG Zhuan-zhao,LI Yun-long,DENG Bo,et al.Research and Analysis of Abnormal Yield Strength during Tensile Test of Pipeline Steel[J].,2009,32(10):51.[doi:1001-3938(2009)04-0051-03]

备注/Memo

备注/Memo:
收稿日期:2013-6-23
基金项目:陕西省重点学科资助项目(YS30230203)。
作者简介:林海威(1987—),男,硕士,研究方向为材料防腐机理与应用技术。          
更新日期/Last Update: