[1]许晓锋,高豹华 编译.塑性变形对落锤撕裂试验异常断口的影响[J].焊管,2015,38(7):58-63.[doi:１００１－３９３８（２０１5）07-0058-06]
　Edited and Translated by XU Xiaofeng,GAO Baohua.Effect of Plastic Deformation on Occurrence of Abnormal Fracture During DWTT[J].,2015,38(7):58-63.[doi:１００１－３９３８（２０１5）07-0058-06]
点击复制

塑性变形对落锤撕裂试验异常断口的影响
分享到：

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
38
期数:
2015年第7期
页码:
58-63
栏目:
国外焊管
出版日期:
2015-07-28

文章信息/Info

Title:
Effect of Plastic Deformation on Occurrence of Abnormal Fracture During DWTT
文章编号:
１００１－３９３８（２０１5）07-0058-06
作者:
许晓锋1; 高豹华2 编译
1. 中国石油集团石油管工程技术研究院，西安 710065；
2. 中国石油天然气管道局第三工程分公司，郑州 451450
Author(s):
Edited and Translated by XU Xiaofeng1;  GAO Baohua2
1. CNPC Tubular Goods Research Institute, Xi’an 710065, China;
2. The Third Engineering Branch of China Petroleum Pipeline Bureau, Zhengzhou 451450, China
关键词:
高强度管线钢; DWTT; 异常断口; 塑性变形; 应变当量
Keywords:
high strength pipeline steel;  DWTT;  abnormal fracture;  plastic deformation;  strain equivalent
分类号:
TE973.1
DOI:
１００１－３９３８（２０１5）07-0058-06
文献标志码:
B
摘要:
介绍了塑性变形对不同组织管线钢DWTT出现异常断口的影响，试样抗拉强度基本相同，采用20 mm厚相同规格，在同一温度下进行试验。研究结果表明，DWTT中的变形主要包括3部分，分别为落锤冲击、弯曲压缩和弯曲拉伸产生的变形；落锤冲击对20 mm厚试样产生的变形有限，且影响区域与异常断口出现的位置不相对应；与落锤冲击相比，弯曲变形产生的塑性应变当量占主导地位，与显微组织无关。这说明异常断口是弯曲变形超过了材料临界塑性应变当量而产生的。
Abstract:
This paper describes the effect of plastic deformation on occurrence of abnormal fracture during DWTT using various steels with different microstructures. Each DWTT was carried out at the same test temperature using 20 mm plates with approximately the same tensile strength. This paper describes the deformation during DWTT, which consists of deformation caused by hammer impact, bending compression, and bending tension. The deformation due to the impact of the hammer during DWTT on a 20 mm plate was limited, and the location affected by the hammer impact did not correspond to that where abnormal fracture occurred. Moreover, the equivalent plastic strain from bending deformation was dominant as compared with that of hammer impact regardless of the microstructure. This suggests that abnormal fracture occurred by exceeding the critical equivalent plastic strain due to the bending deformation.

相似文献/References:

[1]张朝生　编译.高强度管道钢管表面应力腐蚀裂纹的研究[J].焊管,2007,30(4):82.[doi:1001－3938（2007）04－0083－03]
　Edited and Translated by ZHANG Chao-sheng.Study on Surface Stress Corrosion Crack of High Strength Pipeline[J].,2007,30(7):82.[doi:1001－3938（2007）04－0083－03]
[2]王树人,崔志新.管线钢落锤撕裂试验异常脆性断口分析[J].焊管,2007,30(6):69.[doi:1001－3938（2007）06－0069－03]
　WANG Shu-ren? CUI Zhi-xin.Analysis on Abnormal Brittle Fracture of DWTT for Pipeline Steel[J].,2007,30(7):69.[doi:1001－3938（2007）06－0069－03]
[3]潘家华.全球能源变换及管线钢的发展趋势[J].焊管,2008,31(1):9.[doi:1001－3938（2008）01－0009－03]
　PAN Jia-hua.Transformation of Globe Energy & Developing Trend of Pipeline Steel[J].,2008,31(7):9.[doi:1001－3938（2008）01－0009－03]
[4]张 涵,王保华,朱 敏.K60级管线钢低温断裂韧性分析[J].焊管,2008,31(2):35.[doi:1001－3938（2008）02－0035－02]
　ZHANG Han,WANG Bao-hua,ZHANG Jin-li.Analysis on Low-temperature Fracture Toughness of K60 Pipeline Steel[J].,2008,31(7):35.[doi:1001－3938（2008）02－0035－02]
[5]陈 妍,毛艳丽.日本高强度管线钢生产概述[J].焊管,2009,32(3):64.[doi:1001－3938（2009）03－0064－05]
　Chen Yan,MAO Yan-li.Production Summarization of JAPAN Pipeline Steel with High Strength[J].,2009,32(7):64.[doi:1001－3938（2009）03－0064－05]
[6]何小东,马秋荣,王长安,等.高强度管线钢焊接接头不同缺口位置的断裂韧性研究[J].焊管,2009,32(8):21.[doi:1001－3938（2009）08－0021－05]
　HE Xiao-dong,MA Qiu-rong,WANG Chang-an,et al.Fracture Toughness of Welded joints at Different Notch Location and Discussion of Specifications for High Strength line Pipe[J].,2009,32(7):21.[doi:1001－3938（2009）08－0021－05]
[7]杨专钊,李安强,杨溪,等.有关DWTT的管线钢产品标准和试验标准分析对比[J].焊管,2011,34(8):59.
[8]刘振伟,田 鹏,王志太,等.连铸枝晶偏析对X80管线钢力学性能的影响[J].焊管,2014,37(6):31.[doi:１００１－３９３８（２０１4）05-0031-06]
　LIU Zhenwei,TIAN Peng,WANG Zhitai,et al.Effect of Casting Dendritic Segregation on Mechanical Properties of X80 Pipeline Steel[J].,2014,37(7):31.[doi:１００１－３９３８（２０１4）05-0031-06]
[9]牛爱军,等.深海用高强厚壁直缝埋弧焊管开发技术难点分析[J].焊管,2015,38(11):15.[doi:１００１－３９３８（２０１5）11-0015-05]
　NIU Aijun,YIN Lihong,et al.Technical Difficulties Analysis on Development of SAWL Pipe Used for Deep-sea Pipeline with High Strength and Heavy Wall Thickness[J].,2015,38(7):15.[doi:１００１－３９３８（２０１5）11-0015-05]
[10]黄景鹏,徐学利,王洪铎,等.高强度管线钢焊接性研究现状[J].焊管,2016,39(8):19.[doi:10.19291/j.cnki.1001-3938.2016.08.005]
　HUANG Jingpeng,XU Xueli,WANG Hongduo,et al.Research Current Status of High Strength Pipeline Steel Weldability[J].,2016,39(7):19.[doi:10.19291/j.cnki.1001-3938.2016.08.005]
[11]杨扬,李为卫 编译.高强度管线钢DWTT性能研究[J].焊管,2010,33(10):74.[doi:1001-3938(2010)10-0074-06]
　Edited and Translated by YANG Yang,LI Wei-wei.Research on DWTT Properties of High Strength Pipeline Steel[J].,2010,33(7):74.[doi:1001-3938(2010)10-0074-06]

备注/Memo

备注/Memo:
收稿日期：2015-03-25
译者简介：许晓锋（1982—），男，硕士，主要从事石油管标准化工作。
更新日期/Last Update: