[1]许贵芝.提高铝合金1370和1913焊接结构使用可靠性的途径[J].焊管,2010,33(9):61-64.[doi:1001-3938（2010）09-0061-04]
　Edited and Translated by XU Gui-zhi.Methods to Improve Usage Reliability of 1370 and 1913 Aluminum Alloy Welded Constructions[J].,2010,33(9):61-64.[doi:1001-3938（2010）09-0061-04]
点击复制

提高铝合金1370和1913焊接结构使用可靠性的途径
分享到：

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
33
期数:
2010年第9期
页码:
61-64
栏目:
国外焊管
出版日期:
2010-09-28

文章信息/Info

Title:
Methods to Improve Usage Reliability of 1370 and 1913 Aluminum Alloy Welded Constructions
文章编号:
1001-3938（2010）09-0061-04
作者:
许贵芝
（南京航空附件厂，南京 210002）
Author(s):
Edited and Translated by XU Gui-zhi
(Nanjing Aviation Accessories，Nanjing 210002，China)
关键词:
铝合金; Al-Mg-Si-Cu系铝合金; Al-Zn-Mg-Cu系铝合金; 抗裂稳定性; 耐腐蚀稳定性
Keywords:
aluminum alloy; Al-Mg-Si-Cu series aluminum alloy; Al-Zn-Mg-Cu series aluminum alloy; anti-cracking stability; anti-corrosion stability
分类号:
TG441
DOI:
1001-3938（2010）09-0061-04
文献标志码:
A
摘要:
介绍了俄罗斯中等强度铝合金1370和1913的焊接性能。对采用不同焊丝焊接和不同焊后热处理规范所完成的焊接试样分别进行了抗晶间腐蚀（МКК）、分层腐蚀（РСК）、全面腐蚀和腐蚀龟裂（РК）等试验，结果表明：采用添加Sc和Р3М的新型铝合金焊丝进行自动氩弧焊，可以提高焊接接头的力学性能和抗热裂纹形成的稳定性；对焊接接头的完全热处理（淬火+人工时效）能降低焊接残余应力，提高耐蚀稳定性及焊接接头强度。
Abstract:
This article introduced welding performance of Russian moderate strength 1370 and 1913aluminum alloy;several tests were carried out for welding specimens which adopted different wires and heat treatment specifications after welding，such as the resistance to intergranular corrosion，lamination corrosion，general corrosion and corrosion crack，the results showed that adopting new type aluminum alloy wire added Sc and Р3М to conduct automatic argon arc welding can enhance mechanical properties of welding joints and stability caused from antithermal crack；full heat treatment(quenching+artificial aging) to welding joints can reduce welding residual stress，and improve anticorrosion stability and welding joints strength.

参考文献/References:

译自：ЛУКИН В И .Особенности Свариваемости Алюминиевых Сплавов 1370 и 1913.СВАРОЧНОЕ ПРОИЗВОДСТВО.2009(3)：10-13.

相似文献/References:

[1]耿开博.铝管、不锈钢管的高频感应焊接[J].焊管,2009,32(11):29.[doi:1001－3938（2009）11－0029－03]
　GENG Kai-bo.High-frequency Induction Welding of Aluminum and Stainless Steel Pipes[J].,2009,32(9):29.[doi:1001－3938（2009）11－0029－03]
[2]陈茂军.MIG焊接6063铝合金的工艺研究及缺陷预防[J].焊管,2013,36(9):52.[doi:１００１－３９３８（２０１3）09-0052-02]
　CHEN Maojun.Study on the Process of MIG Welding of 6063 Aluminum Alloyand Defect Preventive Methods[J].,2013,36(9):52.[doi:１００１－３９３８（２０１3）09-0052-02]
[3]孙建新,胡瑞玲,王金凤,等.车辆用铝合金燃油箱MIG焊工艺分析与改进[J].焊管,2014,37(5):40.[doi:１００１－３９３８（２０１4）05-0040-03]
　SUN Jianxin,HU Ruiling,WANG Jinfeng,et al.Process Analysis and Improvement of MIG Welding in Aluminum Alloy Fuel Tank for Vehicle[J].,2014,37(9):40.[doi:１００１－３９３８（２０１4）05-0040-03]
[4]康泽军,李先芬,陈 俊,等.黑化及加TiC粉对铝合金焊接成形影响的对比研究[J].焊管,2016,39(6):1.[doi:10.19291/j.cnki.1001-3938.2016.06.001]
　KANG Zejun,LI Xianfen,CHEN Jun,et al.Comparative Study on the Influence of Blackening and Adding TiC Powder on Aluminum Alloy Welding Forming[J].,2016,39(9):1.[doi:10.19291/j.cnki.1001-3938.2016.06.001]
[5]刘志军,张丽婷,张亮仁.LY12铝合金搅拌摩擦焊接头组织与应力分析[J].焊管,2016,39(8):49.[doi:10.19291/j.cnki.1001-3938.2016.08.012]
　LIU Zhijun,ZHANG Liting,ZHANG Liangren.Microstructure and Stress Analysis of Friction Stir Welding Joint of LY12 Aluminum Alloy[J].,2016,39(9):49.[doi:10.19291/j.cnki.1001-3938.2016.08.012]
[6]贾宝丽,吴俊峰,毛 辉,等.5754-O铝合金无缝管开孔封焊性能的研究[J].焊管,2017,40(4):13.[doi:10.19291/j.cnki.1001-3938.2017.04.003]
　JIA Baoli,WU Junfeng,MAO Hui,et al.5754-O Aluminum Alloy Seamless Pipe Hole Sealing Performance Research[J].,2017,40(9):13.[doi:10.19291/j.cnki.1001-3938.2017.04.003]
[7]郭芮岐,张 勇,翁福娟,等.冷喷镍中间层铝/钢电阻点焊接头组织及力学性能[J].焊管,2019,42(5):18.[doi:10.19291/j.cnki.1001-3938.2019.5.003]
　GUO Ruiqi,ZHANG Yong,WENG Fujuan,et al.Microstructure and Mechanical Properties of Cold Spraying Ni Interlayer Al/Steel Resistance Spot Welding Joints[J].,2019,42(9):18.[doi:10.19291/j.cnki.1001-3938.2019.5.003]
[8]强　伟,温斌和,马　欢,等.5A06铝合金薄壁筒形件脉冲交流TIG焊工艺研究[J].焊管,2020,43(3):14.[doi:10.19291/j.cnki.1001-3938.2020.03.003]
　QIANG Wei,WEN Binhe,MA Huan,et al.Research on Pulse AC TIG Welding Process of 5A06 Aluminum Alloy Thin-walled Cylindrical Workpieces[J].,2020,43(9):14.[doi:10.19291/j.cnki.1001-3938.2020.03.003]
[9]朱单单,龙绍檑,龙 潇.铝合金换热器真空钎焊过程中Si的分布及其对焊接质量的影响[J].焊管,2021,44(8):11.[doi:10.19291/j.cnki.1001-3938.2021.08.003]
　ZHU Dandan,LONG Shaolei,LONG Xiao.Distribution of Si during Vacuum Brazing of Aluminum Alloy Heat Exchanger and its Effect on Welding[J].,2021,44(9):11.[doi:10.19291/j.cnki.1001-3938.2021.08.003]
[10]李 欢,齐芃芃,周金旭,等.不同焊接材料对6008-T7铝合金焊接接头组织和性能的影响[J].焊管,2022,45(3):32.[doi:10.19291/j.cnki.1001-3938.2022.03.006]
　LI Huan,QI Pengpeng,ZHOU Jinxu,et al.Effect of Different Welding Materials on Microstructure and Properties of 6008-T7 Aluminum Alloy Welded Joints[J].,2022,45(9):32.[doi:10.19291/j.cnki.1001-3938.2022.03.006]

备注/Memo

备注/Memo:
译者简介：许贵芝，男，高级工程师，南京市焊接学会前委员，长期从事俄文的翻译工作。
收稿日期：2010-03-24
更新日期/Last Update: