相似文献/References:
[1]毛浓召.双面螺旋埋弧焊外焊裂纹产生原因及预防[J].焊管,2007,30(5):86.[doi:1001－3938（2007）05－0086－03]
MAO Nong-zhao.Cause and Prevention of Outside Welding Cracking of Double Spiral Submerged Arc Welding[J].,2007,30(8):86.[doi:1001－3938（2007）05－0086－03]
[2]郭 斌,刘昌明,郑 琳,等.螺旋埋弧焊管用X65级20.62 mm热轧板卷的开发[J].焊管,2008,31(3):48.[doi:1001－3938（2008）03－0048－03]
GUO Bin,LIU Chang-ming,ZHENG Lin,et al.Development of 20.62mm X65 Hot-rolled Coils for SSAW Pipe[J].,2008,31(8):48.[doi:1001－3938（2008）03－0048－03]
[3]唐子金,董军,张晓强,等.西气东输二线工程用X80级埋弧焊管的试制[J].焊管,2009,32(2):27.[doi:1001－3938（2009）02－0027－09]
TANG Zi-jin,DONG Jun,ZHANG Xiao-qiang,et al.Trial Production X80 SSAW Pipe for the West to East Gas Pipeline Project[J].,2009,32(8):27.[doi:1001－3938（2009）02－0027－09]
[4]王晓香.我国天然气工业和管线钢管发展展望[J].焊管,2010,33(3):5.[doi:1001－3938（2010）0３－0005－05]
WANG Xiao-xiang.Prospect Development of China’s Natural Gas Industry and Pipeline steel[J].,2010,33(8):5.[doi:1001－3938（2010）0３－0005－05]
[5]毛周团,尹志远,王少华,等.螺旋埋弧焊管预精焊生产工艺[J].焊管,2010,33(3):52.[doi:1001－3938（2010）0３－0052－04]
MAO Zhou-tuan,YIN Zhi-yuan,WANG Shao-hua,et al.Pre-finishing Process of SAWＨ-Pipe[J].,2010,33(8):52.[doi:1001－3938（2010）0３－0052－04]
[6]李建一,田 鹏,孙志刚,等.螺旋埋弧焊管二步法焊接接头性能分析[J].焊管,2011,34(12):69.[doi:1001-3938（2011）12-0069-04]
LI Jian-yi,TIAN Peng,SUN Zhi-gang,et al.Analysis on Welded Joint Performance of Two-step Welding SAWH Pipe[J].,2011,34(8):69.[doi:1001-3938（2011）12-0069-04]
[7]尹志远,周 岩,李 颖,等.预精焊工艺对螺旋埋弧焊管内焊“马鞍型”焊缝的控制[J].焊管,2012,35(1):40.[doi:1001-3938（2012）01-0040-04]
YIN Zhi-yuan,ZHOU Yan,LI Ying,et al.Control “Saddle-shaped” Inside Weld of SAWH Pipe by Adopting Two-step Welding Process[J].,2012,35(8):40.[doi:1001-3938（2012）01-0040-04]
[8]韩显柱,符知武,周 岩,等.X100级管线钢螺旋管预精焊制造工艺研究[J].焊管,2012,35(7):35.[doi:１００１－３９３８（２０１２）０7-0035-06]
HAN Xian-zhu,FU Zhi-wu,ZHOU Yan,et al.Research on Manufacturing Process of X100 SAWH Pipe Two-Step Welding[J].,2012,35(8):35.[doi:１００１－３９３８（２０１２）０7-0035-06]
[9]杨玮玮,王 强,赵 波.螺旋埋弧焊管预精焊工艺精焊方式探讨[J].焊管,2013,36(3):45.[doi:１００１－３９３８（２０１3）03-0045-04]
YANG Weiwei,WANG Qiang,ZHAO Bo.Discussion on the Finish Welding Method in Tack and Finish Welding Process of SAWH Pipe[J].,2013,36(8):45.[doi:１００１－３９３８（２０１3）03-0045-04]
[10]刘 迟,韩显柱,卢卫卓,等.埋弧焊管自动补焊与手工补焊的焊缝性能对比研究[J].焊管,2013,36(4):18.[doi:１００１－３９３８（２０１3）04-0018-05]
LIU Chi,HAN Xianzhu,LU Weizhuo,et al.Contrast Study on Weld Performance of SAW Pipe by Auto Repair Welding and Manual Repair Welding[J].,2013,36(8):18.[doi:１００１－３９３８（２０１3）04-0018-05]