«上一篇/Previous Article|本期目录/Table of Contents|下一篇/Next Article»

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:

35

期数:

2012年第7期

页码:

28-34

栏目:

工艺与设备

出版日期:

2012-07-28

文章信息/Info

Title:

Research on Firstly Forming Groove Round then Deforming Process for Special Pipe

文章编号:

１００１－３９３８（２０１２）０7-0028-07

作者:

曹国富

（佛山市万乘实业有限公司，广东 佛山 528316）

Author(s):

CAO Guo-fu

（Guangdong Foshan Wancheng Industry Co.， Ltd.， Foshan 528316， Guangdong， China）

关键词:

关键词：槽类异型管; 先成槽圆再变异; 直接成异; 孔型设计

Keywords:

Key words: grooved special pipe;  firstly form round and then deform;  directly deform;  pass design

分类号:

TG332

DOI:

１００１－３９３８（２０１２）０7-0028-07

文献标志码:

B

摘要:

指出了先成圆后变异和直接成异工艺在生产槽类异型管方面的不足，提出以先成圆后变异工艺为载体，将直接成异工艺中实轧凹槽孔型移植到先成圆后变异工艺之第一道开口成型孔型上，并逐步成型、焊接为有槽圆管，随后利用现有异型轧辊整形成槽类异型管，从而形成先成槽圆再变异的新工艺。新工艺注重凹槽孔型与成圆孔型有机结合，并针对凹槽与成圆相互协调的孔型提出了一次轧制、同时轧制、公称尺寸设计、避空轧制等设计原则和方法。先成槽圆再变异工艺所生产的异型管槽型规整，焊缝强度高，焊接速度快，轧辊共用率高，为优质高效低成本地生产槽类管开辟了一条新途径。

Abstract:

In this article， it pointed out the insufficient in manufacturing grooved special pipe of firstly turning into round then deforming and directly deforming， put forward transplanting real rolling groove pass by directly deforming process on　the first open forming pass of firstly turning round then deforming process， and formed progressively to groove round pipe. Subsequently， it utilized the current special rollers to manufacture grooved special pipe， thus， the firstly forming groove round and then deforming process came into being. The new process emphasizes organic combination of groove pass and forming round pass， aiming at mutual-coordinated pass between groove and forming round， some design principles and methods were proposed， such as one-time rolling， rolling at the same time， nominal dimension design， keep-space rolling and etc. The groove shape of special pipe by adopting firstly forming groove round and then deforming is regular， the toughness of weld is high， welding speed is fast， and the share rating of roller is high， which opened up a new way for manufacturing grooved pipe with good quality， high efficiency， and low cost.

备注/Memo

备注/Memo:

作者简介：韩显柱（1977—），男，工学学士，工程师，主要从事螺旋管预精焊技术工作。

常用功能

更新日期/Last Update: