[1]何石磊,骆 鸿,董 超,等.钛合金在高温盐酸中腐蚀行为研究[J].焊管,2021,44(9):1-6.[doi:10.19291/j.cnki.1001-3938.2021.09.001]
 HE Shilei,LUO Hong,DONG Chao,et al.Study on Corrosive Behavior of Titanium Alloy in High Temperature Hydrochloric Acid[J].,2021,44(9):1-6.[doi:10.19291/j.cnki.1001-3938.2021.09.001]
点击复制

钛合金在高温盐酸中腐蚀行为研究()
分享到:

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
第44卷
期数:
2021年第9期
页码:
1-6
栏目:
试验与研究
出版日期:
2021-09-28

文章信息/Info

Title:
Study on Corrosive Behavior of Titanium Alloy in High Temperature Hydrochloric Acid
文章编号:
10.19291/j.cnki.1001-3938.2021.09.001
作者:
何石磊骆 鸿董 超苑清英王 涛李远征王 旭胡绍东刘和平
1. 国家石油天然气管材工程技术研究中心,陕西 宝鸡 721008;2. 宝鸡石油钢管有限责任公司,陕西 宝鸡 721008;3. 北京科技大学 新材料技术研究院,北京 100083;4. 宝鸡钢管西安石油专用管公司,西安 710000
Author(s):
HE Shilei LUO Hong DONG Chao YUAN Qingying WANG Tao LI Yuanzheng WANG Xu HU Shaodong LIU Heping
1. Chinese National Engineering Research Center for Petroleum and Natural Gas Tubular Goods, Baoji 721008, Shaanxi, China; 2. Baoji Petroleum Steel Pipe Co., Ltd., Baoji 721008, Shaanxi, China; 3. Institute for Advanced Materials and Technology of the University of Science and Technology Beijing, Beijing 100083, China; 4. Xi’an OCTG Company of BSG Group, Xi’an 710000, China
关键词:
钛合金油管缓蚀剂胶凝酸腐蚀速率
Keywords:
titanium alloy tubing corrosion inhibitor gelling acid corrosion rate
分类号:
TG172.6
DOI:
10.19291/j.cnki.1001-3938.2021.09.001
文献标志码:
A
摘要:
针对钛合金油管在高温还原性酸盐酸环境中适用性,分别开展了160 ℃不同浓度盐酸、不同温度的20%盐酸+有机酸、不同温度酸化用胶凝酸的三种不同环境下的失重试验,利用SEM、EDS等工具分析了腐蚀形貌和腐蚀产物,研究了钛合金油管在高温还原性酸盐酸环境中腐蚀/性能及适用性。结果显示,在160 ℃高温的7%~20% HCl溶液、90~160 ℃的20%HCl+5% C2H4O2溶液及酸化用胶凝酸鲜酸中,随着盐酸浓度的增加、试验温度的升高,腐蚀速率不断增大,甚至管材发生溶解;添加适当比例的Na2MoO4类缓蚀剂,可在120 ℃及以下温度的20% HCl+5% C2H4O2溶液、酸化用胶凝酸鲜酸溶液中有效降低钛合金管材腐蚀速率,可实现腐蚀速率降低98%以上,而160 ℃下未能有效起保护作用。因此,建议今后研发适应钛合金120 ℃以上温度的新型高温抗酸化缓蚀剂。
Abstract:
In terms of the applicability of titanium alloy tubing in high-temperature hydrochloric acid environments, the weight loss experiment in different concentrations of hydrochloric acid at 160 ℃, 20% hydrochloric acid with organic acid under different temperatures and gelling acids for acidification at different temperatures were carried out. The corrosion morphology and products of titanium alloy tubing were analyzed to study the corrosion performance and applicability in high-temperature reducing hydrochloric acid environments by Scanning Electron Microscope (SEM), Energy Dispersive Spectroscopy (EDS) etc. The results show that in 7%~20% HCl solution at 160 ℃, 20%HCl +5%C2H4O2 solution at 90~160 ℃ and fresh acid of gelling acid for acidification, the corrosion rate increases with the increase of hydrochloric acid concentration and test temperature, and even dissolution occurs. By adding corrosion inhibitor, the tests result show that adding appropriate proportion of Na2MoO4 type corrosion inhibitor can effectively reduce the corrosion rate of titanium alloy tubing in 20%HCl+5%C2H4O2 solution at 120 ℃ and below and under gelling acid for acidification. The corrosion rate can be reduced by more than 98%, but the protection is not effective at 160 ℃. Therefore, it is recommended to develop a new type of high-temperature anti-acidification corrosion inhibitor suitable for titanium alloys above 120 ℃.

参考文献/References:

[1] 董盼,朱世东,李金灵,等. 钛合金及其油井管耐蚀性能研究进展[J]. 钛工业进展,2021,38(2):42-48.[2] 鲜宁,荣明,李天雷,等. 钛合金在高温高压酸性油气井的应用研究进展[J]. 天然气与石油,2020,38(5):96-102.[3] 李冲,陶欢,宋德军,等. 钛合金在高含硫化氢工况中的腐蚀性能研究[J]. 材料开发与应用,2020,35(6):19-23.[4] 李美俊. 酸性介质环境下钛材的腐蚀与防护[J]. 内蒙古石油化工,2014(21):43.[5] 高兴,石炜,陆铨,等. TC17钛合金在盐酸溶液中的腐蚀特性[J]. 燃气涡轮试验与研究,2018,31(6):30-35.[6] 孟康. TA31合金在盐酸溶液中的腐蚀行为研究[D]. 秦皇岛:燕山大学,2019.[7] 李琋,马永松,李永涛,等. Q235、316L和钛合金在高氯压裂返排液介质中的耐腐蚀性[J].材料保护,2018,51(10):128-132.[8] 孟文斐,薛新茹,徐进军. 油田酸化缓蚀剂的发展与应用[J]. 化工管理,2016(29):182. [9] 孙亚东. 油气田开发中酸化压裂技术的应用分析[J].石化技术,2021,28(5):65-66.[10] 高飞. 苛刻腐蚀环境中钛合金油套管材料的适用性研究[D]. 西安:西安石油大学,2020.[11] 闫静,吴贵阳,吴华,等. 钛合金材料在高酸性环境中的耐蚀性能研究[J].石油与天然气化工,2014,43(2): 165-167. [12] 李媛媛. 苛刻腐蚀环境下钛合金钝化膜的稳定性研究[J]. 西安石油大学学报(自然科学版),2018,33(4):120-126.[13] 梁伟. 苛刻腐蚀环境中钛合金管材的界面特性研究[D]. 西安:西安石油大学,2018.[14] 杜娟,刘青茂,王付胜,等. Ti-6Al-4V钛合金在氢氟酸-硝酸体系下的缓蚀行为及机理[J]. 材料导报,2019,33(6):1000-1005.[15] 林翠,杜楠,胡舸,等. 氢氟酸-硝酸体系中Ti-6Al-4V的腐蚀加工溶解特征[J]. 稀有金属材料与工程,2016,45(10):2628-2634.

相似文献/References:

[1]李小龙,等.一种新型复配酸化缓蚀剂对N80钢缓蚀性能的影响[J].焊管,2016,39(6):5.[doi:10.19291/j.cnki.1001-3938.2016.06.002]
 LI Xiaolong,ZHANG Junping,BI Zongyue,et al.Influence of the Corrosion Inhibition Performance of a New Composite Acidizing Corrosion Inhibitor to N80 Steel[J].,2016,39(9):5.[doi:10.19291/j.cnki.1001-3938.2016.06.002]
[2]李小龙,张军平,任永峰,等.两种金属化合物对喹啉季铵盐缓蚀性能的影响[J].焊管,2017,40(8):8.[doi:10.19291/j.cnki.1001-3938.2017.08.002]
 LI Xiaolong,ZHANG Junping,REN Yongfeng,et al.Influence of Two Kinds of Metal Compounds on Corrosion Inhibition Performance of Quinolone Quaternary Ammonium Salt[J].,2017,40(9):8.[doi:10.19291/j.cnki.1001-3938.2017.08.002]
[3]吕祥鸿,闫亚丽,王 悦.某区块油井套管腐蚀破坏机理及防护措施研究[J].焊管,2019,42(1):10.[doi:10.19291/j.cnki.1001-3938.2019.1.002]
 LYU Xianghong,YAN Yali,WANG Yue.Study on Corrosion Failure Mechanism and Protective Measures of Oil Well Casing[J].,2019,42(9):10.[doi:10.19291/j.cnki.1001-3938.2019.1.002]
[4]熊新民,宋 洋,宋文文,等.HLHT-1缓蚀剂对20G钢在模拟哈拉哈塘介质中的缓蚀效果研究[J].焊管,2020,43(1):26.[doi:10.19291/j.cnki.1001-3938.2020.01.005]
 XIONG Xinmin,SONG Yang,SONG Wenwen,et al.Research on 20G Steel Corrosion Inhibition Effect of HLHT-1 in Halahatang Oilfield[J].,2020,43(9):26.[doi:10.19291/j.cnki.1001-3938.2020.01.005]
[5]何石磊,姚爱国,苑清英,等.110ksi 级钛合金油管耐蚀性能研究[J].焊管,2023,46(5):23.[doi:10.19291/j.cnki.1001-3938.2023.05.004]
 HE Shilei,YAO Aiguo,YUAN Qingying,et al.Study on Corrosion Performance of 110ksi Grade Titanium Alloy Tubing[J].,2023,46(9):23.[doi:10.19291/j.cnki.1001-3938.2023.05.004]
[6]何石磊,任永峰,高盟召,等.胶凝酸及酸化返排液中钛合金管材均匀腐蚀行为研究[J].焊管,2023,46(11):9.[doi:10.19291/j.cnki.1001-3938.2023.11.002]
 HE Shilei,REN Yongfeng,GAO Mengzhao,et al.Study on Uniform Corrosion Behavior of Titanium Alloy in Oilfield Gelled Acid and Acidification Flowback Fluid[J].,2023,46(9):9.[doi:10.19291/j.cnki.1001-3938.2023.11.002]

备注/Memo

备注/Memo:
收稿日期:2021-07-02基金项目: 中国石油科技创新基金研究项目“高强度、低密度、抗腐蚀钛合金油井管设计和服役研究”(项目编号2019D-5007-0308)作者简介:何石磊(1983—),男,硕士,高级工程师,主要从事油井管产品研究与开发工作。
更新日期/Last Update: 2021-09-16