[1]赵金兰,程 佩,王 彬,等.TS-90连续油管断裂失效分析[J].焊管,2022,45(6):39-44.[doi:10.19291/j.cnki.1001-3938.2022.06.007]
　ZHAO Jinlan,CHENG Pei,WANG Bin,et al.Fracture Failure Analysis of TS-90 Coiled Tubing[J].,2022,45(6):39-44.[doi:10.19291/j.cnki.1001-3938.2022.06.007]
点击复制

TS-90连续油管断裂失效分析()
分享到：

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
45
期数:
2022年第6期
页码:
39-44
栏目:
失效分析
出版日期:
2022-06-28

文章信息/Info

Title:
Fracture Failure Analysis of TS-90 Coiled Tubing
文章编号:
10.19291/j.cnki.1001-3938.2022.06.007
作者:
赵金兰; 程 佩; 王 彬; 仝 珂
1. 中国石油集团工程材料研究院有限公司，西安 710077；2. 中国石油天然气股份有限公司 长庆油田分公司，西安 710021；3. 中国石油天然气股份有限公司 青海油田分公司，甘肃 敦煌 736202
Author(s):
ZHAO Jinlan;  CHENG Pei;  WANG Bin;  TONG Ke
1. CNPC Tubular Goods Research Institute, Xi’an 710077, China; 2. Petrochina Changqing Oilfeild Company, Xi’an 710021, China; 3. PetroChina Qinghai Oilfield Company, Dunhuang 736202, Gansu, China
关键词:
连续油管; 裂纹; 应力腐蚀开裂; 失效
Keywords:
coiled tubing;  crack;  stress corrosion cracking;  failure
分类号:
TG115
DOI:
10.19291/j.cnki.1001-3938.2022.06.007
文献标志码:
B
摘要:
为了分析某井气举作业用TS-90连续油管断裂失效原因，通过宏观分析、无损检测、几何尺寸测量、化学成分分析、力学性能测试、金相检测、扫描电镜（SEM）等手段，对该失效连续油管进行了试验研究。试验结果显示，该失效连续油管的管体壁厚、外径、化学成分、显微硬度、晶粒度均符合API SPEC 5ST—2010要求；油管表面整体布满台阶状横向裂纹，裂纹沿油管周向扩展；原始裂纹断口表面大量腐蚀产物覆盖，且从裂纹源区到裂纹尖端部位，始终存在少量导致应力腐蚀开裂的S元素；原始裂纹萌生于腐蚀坑底，裂纹尖端呈局部沿晶脆性断裂，且断口外表面附近呈解理形貌。综合分析结果表明，该连续油管断裂的根本原因是应力腐蚀开裂，其在井下作业时受腐蚀因素和应力载荷的共同作用，管体外表面萌生应力腐蚀裂纹，裂纹扩展并最终导致管体断裂失效。
Abstract:
In order to analyze the fracture failure causes of TS-90 coiled tubing for gas lift operation in a well, the failed coiled tubing was tested and studied by means of macro analysis, nondestructive testing, geometric dimension measurement, chemical composition analysis, mechanical property test, metallographic examination and scanning electron microscope (SEM) testing. The results showed that the wall thickness, outer diameter, chemical composition, microhardness and grain size of the failed coiled tubing meet the requirements of API SPEC 5ST—2010. The overall surface of the oil pipe is covered with stepped transverse cracks, which extend along the circumference of the oil pipe. The surface of the original crack fracture is covered by a large number of corrosion products, and there is always a small amount of S element leading to stress corrosion cracking from the crack source area to the crack tip. The original crack originated at the bottom of the corrosion pit, the crack tip showed local intergranular brittle fracture, and there was cleavage near the outer surface of the fracture. The comprehensive analysis results show that the root cause of the coiled tubing fracture is stress corrosion cracking. Under the combined action of corrosion factors and stress during downhole operation, stress corrosion cracks are initiated on the outer surface of the pipe, the cracks expand and eventually lead to the fracture failure of the pipe body.

参考文献/References:

[1] 秦川. 连续油管在含硫介质中耐腐蚀评价[D]. 西安：西安理工大学，2014：1-4.[2] 贺会群. 连续油管技术与装备发展综述[J]. 石油机械，2016，34（1）：1-5.[3] American Society of Testing Materials. Standard test methods and practices for chemical analysis of steel products: ASTM A 370—2020[S]. [S.l.]：ASTM，2020. [4] American Society of Testing Materials. Standard test method for knoop and vickers hardness of materials：ASTM E384—2017[S]. [S.l.]：ASTM，2017.[5] American Society of Testing Materials. Standard guide for preparation of metallographic specimen：ASTM E3—11(2017)[S]. [S.l.]：ASTM，2017.[6] American Society of Testing Materials. Standard test methods for rockwell hardness of metallic materials：ASTM E45—18a[S]. [S.l.]：ASTM，2018.[7] American Society of Testing Materials. Standard test methods for determining average grain size：ASTM E112—13 [S]. [S.l.]：ASTM，2013.[8] 钟群鹏，赵子华. 断口学[M]. 北京：高等教育出版社，2005：178-185.[9] 孙荧，于庆波. 低碳钢的解理断裂机理及微观形貌分析[J]. 昆明理工大学学报（自然科学版），2011（4）：18-22.[10] 李鹤林. 石油管工程学[M]. 北京：石油工业出版社，2020：334-336.

相似文献/References:

[1]张朝生 编译.C，Si，Mn含量和焊接区氧含量对ERW钢管焊缝区压扁试验的影响[J].焊管,2007,30(5):98.[doi:1001－3938（2007）05－0098－02]
　Edited and Translated by ZHANG Chao-sheng.The Affects of Contents of C,Si,Mn and Concentration of Oxygen in Welding Area to Flatten Test of ERW Pipe[J].,2007,30(6):98.[doi:1001－3938（2007）05－0098－02]
[2]林春明,陈文豪.螺旋焊管拍片射线机安放位置的工艺探讨[J].焊管,2007,30(6):61.[doi:1001－3938（2007）06－0061－03]
　LIN Chun-ming,CHEN Wen-hao.Process Discussion on Installation Position of X Radiography-filming Unit for SSAW Pipe[J].,2007,30(6):61.[doi:1001－3938（2007）06－0061－03]
[3]周建宏,石 凯,卢雪峰,等.国产CT80级连续油管用钢带对接焊焊接方法探讨[J].焊管,2009,32(5):25.[doi:1001－3938（2009）05－0025－03]
　ZHOU Jian-hong,SHI Kai,LU Xue-feng,et al.Discussion on Strip Butt-welding Method of CT80 Grade Coiled Tubing Made in China[J].,2009,32(6):25.[doi:1001－3938（2009）05－0025－03]
[4]王文武,李继红,赵鹏康,等.连续油管环焊温度场及残余应力场数值分析[J].焊管,2011,34(3):18.
[5]秦跃平,张佃平.连续油管在油田洗井作业中的应用[J].焊管,2011,34(9):53.
[6]张家若.磨煤机出口端盖裂纹焊接[J].焊管,2011,34(10):44.[doi:1001-3938（2011）10-0044-05]
　ZHANG Jia-ruo.Mill End Cover Crack Welding[J].,2011,34(6):44.[doi:1001-3938（2011）10-0044-05]
[7]梁根选,金时麟 编译.连续油管下井作业技术与设备[J].焊管,2011,34(10):72.[doi:1001-3938(2011)10-0072-06]
　Edited and Translated by LIANG Gen-xuan,JIN Shi-lin.Coiled Tubing Technology and Equipment[J].,2011,34(6):72.[doi:1001-3938(2011)10-0072-06]
[8]李　琳,李继红,余　晗,等.连续油管TIG焊焊接接头最薄弱区工艺-性能神经网络预测模型[J].焊管,2012,35(1):5.[doi:１００１－３９３８（２０１２）０１-0005-03]
　LI Lin,LI Ji-hong,YU Han,et al.The Neural Network Prediction Model of Process-property in the Weakest Area of Coiled Tubing TIG Welded Joint[J].,2012,35(6):5.[doi:１００１－３９３８（２０１２）０１-0005-03]
[9]罗　鹏,秦跃平,陈　锐,等.体积压裂与速度管柱排液复合技术的应用[J].焊管,2012,35(1):29.[doi:1001-3938（2012）01-0029-04]
　LUO Peng,QIN Yue-ping,CHEN Rui,et al.Application of Volume Fracturing and Velocity String Discharging Fluid Composite Technology[J].,2012,35(6):29.[doi:1001-3938（2012）01-0029-04]
[10]李继红,李 琳,赵鹏康,等.连续油管直缝高频焊热影响区最薄弱区硬度的神经网络预测[J].焊管,2012,35(7):5.[doi:１００１－３９３８（２０１２）０7-0005-04]
　LI Ji-hong,LI Lin,ZHAO Peng-kang,et al.The Neural Network Prediction of Hardness in the Weakest Area of Coiled Tubing in HFW HAZ[J].,2012,35(6):5.[doi:１００１－３９３８（２０１２）０7-0005-04]
[11]冀亚锋,张 宏,毕宗岳,等.连续油管材料临界CTOD值计算方法研究[J].焊管,2012,35(11):5.[doi:００１－３９３８（２０１２）11-0005-04]
　JI Yafeng,ZHANG Hong,BI Zongyue,et al.Research on a New Method for Calculating Critical CTOD Value of Coiled Tubing Material[J].,2012,35(6):5.[doi:００１－３９３８（２０１２）11-0005-04]
[12]李鸿斌,等. Φ31.8 mm连续油管断裂失效分析[J].焊管,2016,39(5):31.[doi:10.19291/j.cnki.1001-3938.2016.05.006]
　LI Hongbin,BI Zongyue,YU Han,et al.Fracture Failure Analysis of Φ31.8 mm Coiled Tubing[J].,2016,39(6):31.[doi:10.19291/j.cnki.1001-3938.2016.05.006]

备注/Memo

备注/Memo:
收稿日期：2022-02-05作者简介：赵金兰（1982—），女，硕士，高级工程师，现主要从事石油管道技术支持工作。
更新日期/Last Update: 2022-06-21