[1]周兆明,李波,张欢.不锈钢连续管在线检测与疲劳寿命数据融合评价方法[J].焊管,2023,46(7):76-82.[doi:10.19291/j.cnki.1001-3938.2023.07.011]
　ZHOU Zhaoming,LI Bo,ZHANG Huan.Online Inspection and Fatigue Life Data Fusion Evaluation Method for Stainless Steel Coiled Tubing[J].,2023,46(7):76-82.[doi:10.19291/j.cnki.1001-3938.2023.07.011]
点击复制

不锈钢连续管在线检测与疲劳寿命数据融合评价方法()
分享到：

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
46
期数:
2023年第7期
页码:
76-82
栏目:
作业技术与装备
出版日期:
2023-07-19

文章信息/Info

Title:
Online Inspection and Fatigue Life Data Fusion Evaluation Method for Stainless Steel Coiled Tubing
文章编号:
10.19291/j.cnki.1001-3938.2023.07.011
作者:
周兆明; 李波; 张欢
1. 西南石油大学 机电工程学院，成都 610500；
2. 中国航油集团贵州石油有限公司，贵阳 550005
Author(s):
ZHOU Zhaoming;  LI Bo;  ZHANG Huan
1. School of Mechanical and Electrical Engineering, Southwest Petroleum University, Chengdu 610500, China; 2. China National Aviation Oil Group Guizhou Petroleum Co., Ltd., Guiyang 550005, China
关键词:
连续管; 疲劳寿命预测; 涡流检测; 双相不锈钢
Keywords:
coiled tubing;  fatigue life prediction;  eddy current testing;  duplex stainless steel
分类号:
TG115.28
DOI:
10.19291/j.cnki.1001-3938.2023.07.011
文献标志码:
A
摘要:
双相不锈钢连续管具有高塑性、高韧性和高耐腐蚀性，在海上和陆上作业中得到了广泛应用。为了解决现有漏磁检测技术对磁导率较低的双相不锈钢连续管在线检测时无法实现饱和磁化的问题，提出了一种涡流检测方法，设计使用差分曲面探头检测连续管缺陷，阵列探头交替放置于连续管表面，可360°全覆盖检测直径小于50.8 mm的连续管。结果表明，该方法可以检测纵向和轴向缺陷，克服了漏磁检测方法只能检测碳钢中单向缺陷的局限性。同时，针对理论低周疲劳模型无法精准预测含缺陷连续管疲劳寿命的问题，提出基于检测数据的疲劳预测模型，提高了连续管疲劳预测的可靠性。通过建立周向涡流检测模型，可实现连续管疲劳寿命的精准预测，从而提高产品利用率，节约成本，为连续管的高效利用提供技术支撑。
Abstract:
Duplex stainless steel coiled tubing has been widely used in offshore and onshore operations because of its high plasticity, toughness and corrosion resistance. In order to solve the problem that existing magnetic leakage detection technology cannot achieve saturation magnetization during online testing of dual phase stainless steel coiled tubing with low permeability, an eddy current testing method is proposed to detect the defects of coiled tubing using a differential surface probe. The array probes are alternately placed on the surface of the coiled tubing, and can detect the coiled tubing with a diameter of less than 50.8 mm with full coverage of 360°. The experiment shows that this method can detect longitudinal and axial defects, overcoming the limitation that the magnetic flux leakage detection method can only detect one?ay defects in carbon steel. In view of the problem that the theoretical low?ycle fatigue model cannot accurately predict the fatigue time of coiled tubing,a fatigue predictionmodel based on detection data is established and the reliability of coiled tubing fatigue prediction is improved. By establishing a circumferential eddy current testing model, precise prediction of the fatigue life of coiled tubing can be achieved, thereby improving product utilization, saving costs, and providing technical support for the efficient utilization of coiled tubing.

参考文献/References:

［1］ 高润秋，段建良，董健，等.2205DSS连续管的适用性研究［J］.石油管材与仪器，2021，7（2）：38-42.［2］ STANLEY R K.Results of a new coiled?ubing assessment tool［C］//SPE/ICoTA Coiled tubing & Well Intervention Conference and Exhibition. New York，America：OnePetro，2011.［3］ KOPER M G M，TAN S，ROSEN P. Full?cale，low?ycle fatigue tests with 2 in coiled tubing and an automatic coiled tubing inspection and monitoring system［C］//SPE/ICoTA North American Coiled Tubing Roundtable. New York，America：OnePetro，1997.［4］ ROSEN P. Remote coiled tubing operation monitoring［C］//SPE/ICoTA Coiled Tubing Roundtable. New York，America：OnePetro，1998.［5］ STAYER A，ZWANENBURG M，SCUADRONI N， et al. State-of-the-art portable measurement and defect detection technology for coiled?ubing string［C］//SPE/ICoTA Coiled Tubing & Well Intervention Conference & Exhibition. New York，America：OnePetro，2013.［6］ 牛成成.斯伦贝谢连续管完整性实时监测系统CoilScan RT［J］.石油钻探技术，2015，43（6）：65.［7］ QUIGLEY M S， STONE L R. The benefits of real?ime coiled tubing diameter measurements［C］//SPE/ICoTA Coiled Tubing Roundtable. New York，America：OnePetro，1998.［8］ 明瑞卿，贺会群，唐纯静，等.连续管检测监控技术［J］.特种油气藏，2017，24（3）：164-169.［9］ 吴义峰，武新军，康宜华.连续管直径的恒磁测量方法及装置［J］.自动化与仪表，2000（3）：9-12，16.［10］ 武新军，康宜华，吴义峰，等.连续管椭圆度在线磁性检测原理与方法［J］.石油矿场机械，2001（6）：12-14.［11］ 韩兴，康宜华，李雪辉.连续管椭圆度恒磁检测技术及装置研究［J］.石油机械，2000（10）：17-19，2.［12］ 康宜华，孙有为，孙燕华.移动式连续管检测系统设计［J］.石油机械，2012，40（11）：86-89.［13］ ZHOU Z M，ZHANG J，WANG C，et al. Non?agnetization detection of arbitrary direction defects in coiled tubing based on fluxgate sensor ［J］. IEEE SENSORS JOURNAL，2020，20（14）：7661-7668.［14］ ZHOU Z，LI J，XI Z，et al. Real?ime online inversion of GA-PSO-BP flux leakage defects based on information fusion： Numerical simulation and experimental research［J］.Journal of Magnetism and Magnetic Materials，2022（563）：169936.［15］ 王立敏，宋志龙，常家玉.连续管电磁无损检测试验分析及应用［J］.石油矿场机械，2015，44（7）：60-63.［16］ WULIANG Y， PEYTON A J， DICKINSON S J. Simultaneous measurement of distance and thickness of a thin metal plate with an electromagnetic sensor using a simplified model ［J］. IEEE Transactions on Instrumentation and Measurement，2004，53（4）：1335-1343.［17］ LU M，MENG X，YIN W，et al. Thickness measurement of non?agnetic steel plates using a novel planar triple?oil sensor ［J］. NDT & E International，2019（107）：102148.［18］ 秦建柱，唐甸武，殷尊，等.小径管周向裂纹涡流检测仿真与试验研究［J］.压力容器，2022，39（12）：23-29.［19］ 王长新，陈金忠，辛佳兴，等.基于SSA-BP神经网络的管道裂纹涡流识别研究［J］.石油机械，2022，50（8）：118-125.［20］ 辛佳兴，陈金忠，李晓龙，等.基于阵列涡流技术的管道变形检测数值分析［J］.石油机械，2022，50（2）：115-122.［21］ XIAO Q，FENG J，XU Z，et al. Receiver signal analysis on geometry and excitation parameters of remote field eddy current probe ［J］. IEEE Transactions on Industrial Electronics，2022，69（3）：3088-3098.［22］ CHEN X L，LI J W，WANG Z H. Inversion method in pulsed eddy current testing for wall thickness of ferromagnetic pipes［J］. IEEE Transactions on Instrumentation and Measurement，2020，69（12）：9766-9773.［23］ CHENG W Y. Interpretation of impedance in the light of energy dissipation and eddy current nondestructive evaluation of pipe wall thickness［J］. IEEE Transactions on Instrumentation and Measurement，2022，71（6）：1-11.［24］ HAMIA R， CORDIER C， DOLABDJIAN C.Eddy?urrent non?estructive testing system for the determination of crack orientation［J］. NDT & E International，2014，61（5）：24-28.［25］ ZHAO S X，SUN L S，GAO J Q，et al. Uniaxial ACFM detection system for metal crack size estimation using magnetic signature waveform analysis［J］. Measurement， 2020（164）：108090.［26］ SHAIKH H，SIVAIBHARASI N，SASI B，et al. Use of eddy current testing method in detection and evaluation of sensitisation and intergranular corrosion in austenitic stainless steels［J］.Corrosion Science， 2006，48（6）：1462-1482.［27］ CHU Z Q，JIANG Z K，MAO Z N，et al. Low?ower eddy current detection with 1-1 type magnetoelectric sensor for pipeline cracks monitoring［J］.Sensors and Actuators A：Physical，2021（318）：112496.［28］ MANSON S S. Behavior of materials under conditions of thermal stress［M］. Washington D C，America：National Advisory Committee for Aeronautics，1953.［29］ COFFIN JR L F. A study of the effects of cyclic thermal stresses on a ductile metal［J］.Transactions of the American Society of Mechanical engineers，1954，76（6）：931-949.［30］ 薛景川. 工程结构的疲劳寿命估算方法和许用强度确定［M］.北京：清华大学出版社，1988.［31］ AVAKOV V A，FOSTER J C，SMITH E J. Coiled tubing life prediction［C］//Offshore Technology Conference. Houston，America：OTC，1993.［32］ TIPTON S M，CARLSON G H，SOREM J R.Fatigue integrity analysis of rotating coiled tubing［C］//SPE/ICoTA Well Intervention Conference and Exhibition. New York，America：OnePetro，2006.［33］ 韩秀明.浅谈连续管技术的现状与展望［J］.石油管材与仪器，2015，1（2）：1-3，6.［34］ 王海涛，李相方.连续管卷曲低周疲劳寿命预测［J］.石油机械，2008，57（11）：25-27，31.［35］ 于桂杰，赵崇，迟建伟，等.基于人工神经网络的连续管疲劳寿命预测［J］.中国石油大学学报（自然科学版），2018，42（3）：131-136.［36］ 程文.连续管力学特性分析与疲劳寿命研究［D］.成都：西南石油大学，2016.［37］ 周兆明，谭金松，张健，等. 连续管疲劳寿命模型与试验机的发展概述［J］.石油矿场机械，2020，49（6）：6-11.［38］ 毕宗岳，张晓峰，张万鹏.连续管疲劳寿命试验研究［J］.焊管，2012，35（6）：5-8.［39］ 美国石油学会学术委员会.连续管保养及维护：API 5C8［S］.华盛顿：美国石油学会，2017.［40］ CHRISTIAN A，TIPTON S M. Statistical analysis of coiled tubing fatigue data［C］//SPE/ICoTA Well Intervention Conference and Exhibition. New York，America：OnePetro，2009.

相似文献/References:

[1]毕宗岳,付宏强 编译.高强度连续管[J].焊管,2007,30(6):85.[doi:1001－3938（2007）06－0085－05]
　Edited and Translated by BI Zong-yue,FU Hong-qiang.High Strength Coiled Tubing[J].,2007,30(7):85.[doi:1001－3938（2007）06－0085－05]
[2]毕宗岳,张锦刚.连续管焊丝的试验研究[J].焊管,2008,31(1):26.[doi:1001－3938（2008）01－0026－03]
　BI Zong-yue,ZHANG Jin-gang.Testing & Research of Welding Wire Used for Coil Tubing[J].,2008,31(7):26.[doi:1001－3938（2008）01－0026－03]
[3]卢雪峰,石凯,周建宏,等.焊缝碾压形变热处理及其在连续管中的应用[J].焊管,2009,32(4):35.[doi:1001－3938（2009）04－0035－03]
　LU Xue-feng,SHI Kai,ZHOU Jian-hong,et al.Weld Thermomechanical Treatment with Roller Compaction and It’s Application in Coiled Tubing Manufacture[J].,2009,32(7):35.[doi:1001－3938（2009）04－0035－03]
[4]韩　军,高惠临,韩新利.HFW钢管焊缝疲劳特性与疲劳寿命预测方法研究[J].焊管,2011,34(12):27.[doi:1001-3938（2011）12-0027-06]
　HAN Jun,GAO Hui-lin,et al.Research on the Fatigue Property of HFW Pipe Welded Seam and Fatigue Life Forecast Method[J].,2011,34(7):27.[doi:1001-3938（2011）12-0027-06]
[5]李霄,石凯,刘彦明,等.连续管焊接工艺及接头性能研究[J].焊管,2012,35(5):15.[doi:１００１－３９３８（２０１２）０5-0015-04]
　LI Xiao,SHI Kai,LIU Yan-ming,et al.Research on Coiled Tubing Butt Welding Process and Properties of Welded Joint[J].,2012,35(7):15.[doi:１００１－３９３８（２０１２）０5-0015-04]
[6]鲁明春,鲍海霞,陈为民,等.连续管水平井作业下入深度计算及应用[J].焊管,2014,37(7):31.[doi:１００１－３９３８（２０１4）07-0031-04]
　LU Mingchun,BAO Haixia,CHEN Weimin,et al.Running Depth Calculation and Application of Coiled Tubing（CT） Horizontal Well Operation[J].,2014,37(7):31.[doi:１００１－３９３８（２０１4）07-0031-04]
[7]鲁明春.水平井连续管存储式测井技术在涩北气田的试验应用[J].焊管,2014,37(11):27.[doi:１００１－３９３８（２０１4）11-0027-03]
　LU Mingchun.Test Application of Horizontal Coiled Tubing Store Type Logging Technology in China Sebei Gas Field[J].,2014,37(7):27.[doi:１００１－３９３８（２０１4）11-0027-03]
[8]付宏强,郜 飞.国内外连续管标准简介[J].焊管,2015,38(2):68.[doi:１００１－３９３８（２０１5）02-0068-05]
　FU Hongqiang,GAO Fei.Brief Introduction for Coiled Tubing (CT) Standard at Home and Abroad[J].,2015,38(7):68.[doi:１００１－３９３８（２０１5）02-0068-05]
[9]汪海涛,等.高强度CT100连续管力学性能研究[J].焊管,2016,39(4):1.[doi:10.19291/j.cnki.1001-3938.2016.04.001]
　WANG Haitao,YU Han,CHANG Yongle,et al.Mechanical Properties Research of High Strength CT100 Coiled Tubing[J].,2016,39(7):1.[doi:10.19291/j.cnki.1001-3938.2016.04.001]
[10]王维亮,等.连续管管-管对接自动焊技术研究[J].焊管,2016,39(12):9.[doi:10.19291/j.cnki.1001-3938.2016.12.003]
　WANG Weiliang,Yu Han,et al.Automatic Welding Technology Research on Coiled Tubing Butt Welding[J].,2016,39(7):9.[doi:10.19291/j.cnki.1001-3938.2016.12.003]

备注/Memo

备注/Memo:
收稿日期：2023-05-03
基金项目： 国家自然科学基金“极端条件下气井管柱耦联振动力学行为与控制基础理论研究”（项目编号51974271）。
作者简介：周兆明（1983—），男，博士，副教授，主要从事连续管在线检测技术和评价研究工作。
更新日期/Last Update: 2023-07-19