[1]符成学,雷小伟,贾晓飞,等.钛合金激光增材制造技术研究与应用进展[J].焊管,2023,46(8):11-18.[doi:10.19291/j.cnki.1001-3938.2023.08.002]
　FU Chengxue,LEI Xiaowei,JIA Xiaofei,et al.Research and Application Progress of Titanium Alloy Laser Additive Manufacturing Technology[J].,2023,46(8):11-18.[doi:10.19291/j.cnki.1001-3938.2023.08.002]
点击复制

钛合金激光增材制造技术研究与应用进展()
分享到：

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
46
期数:
2023年第8期
页码:
11-18
栏目:
综述
出版日期:
2023-08-19

文章信息/Info

Title:
Research and Application Progress of Titanium Alloy Laser Additive Manufacturing Technology
文章编号:
10.19291/j.cnki.1001-3938.2023.08.002
作者:
符成学; 雷小伟; 贾晓飞; 张文豪; 范金伟; 王伟超; 崔永杰
中国船舶集团公司第七二五研究所，河南 洛阳 471023
Author(s):
FU Chengxue;  LEI Xiaowei;  JIA Xiaofei;  ZHANG Wenhao; FAN Jinwei;  WANG Weichao;  CUI Yongjie
Luoyang Ship Material Research Institute, Luoyang 471023, Henan, China
关键词:
钛合金; 增材制造; 激光; 应用
Keywords:
titanium alloy; additive manufacturing; laser; application
分类号:
TG146.23
DOI:
10.19291/j.cnki.1001-3938.2023.08.002
文献标志码:
A
摘要:
阐述了钛合金激光选区熔化、钛合金激光熔粉沉积和钛合金激光熔丝沉积增材制造技术的原理及特点，并对钛合金激光增材制造技术的国内外应用现状进行了总结。分析表明，激光选区熔化技术、激光熔粉沉积技术和激光熔丝沉积技术是目前具有代表性且应用最广泛的三种钛合金激光增材制造技术，其中激光选区熔化技术和激光熔粉沉积技术均有很多典型产品已经获得商业应用，而激光熔丝沉积技术尚处于实验室向工程化应用过渡阶段。最后，对钛合金激光增材制造技术的发展方向进行了展望。
Abstract:
The principles and characteristics of titanium alloy laser selective melting, titanium alloy laser powder deposition,and titanium alloy laser wire deposition additive manufacturing technology were elaborated. The application status of titanium alloy laser additive manufacturing technology at home and abroad was summarized. Analysis shows that laser selective melting technology, laser powder deposition technology, and laser melt deposition technology are three representative and most widely used titanium alloy laser additive manufacturing technologies. Many typical products of laser selective melting technology and laser melt deposition technology have been commercially applied, and laser melt deposition technology is still in the transition stage from laboratory to engineering application. Finally, the development direction of titanium alloy laser additive manufacturing technology was prospected.

参考文献/References:

[1]XIONG Y，TANG Y L，ZHOU Q，et al. Intelligent additive manufacturing and design state of the art and future perspectives[J].Additive Manufacturing，2022（59）：103139.[2]卢秉恒. 增材制造技术——现状与未来[J]. 金属学报，2021，57（11）：1472-1483.[3]孙晓峰，宋巍，梁静静，等.激光增材制造高温合金材料与工艺研究进展[J].金属学报，2021，57（11）：1472-1483.[4]张群森，李崇桂，李帅，等.钛合金激光增材制造技术研究现状及展望[J].热加工工艺，2018，47（12）：21-24.[5]MOSALLANEJAD M H，NIROUMAND B，AVERSAA，et al. Insitualloying in laser based additive manufacturing processes： acritical review[J]. Journal of Alloys and Compounds，2021（872）：159567.[6]杨强，鲁中良，黄福旭，等.钛合金激光增材制造技术研究现状及发展趋势[J].航空制造技术，2016（12）：1-6.[7]葛江波，张安峰，李涤尘，等.激光金属直接成形DZ125L高温合金零件工艺的研究[J].中国激光，2011，38（7）：119-125.[8]DING X P，LI H M，ZHU J Q，et al. Application of infrared thermography for laser metal wire additive manufacturing in vacuum[J].Infrared Physics & Technology，2017（81）：166-169.[9]YUAN D，SHAO S Q，GAO C H，et al.Grain refining of Ti-6Al-4V alloy fabricated by laser and wire additive manufacturing assisted with ultrasonic vibration[J].Ultrasonics Sonochemistry，2021（73）：105472.[10]KUZNETSOV A，JERMOMEN A，GOVEKAR E. Droplet detachment regimes in annular laser beam droplet generation from a metal wire[J].CIRP Annals，2014，63（1）：225-228.[11]孙小峰，荣婷，黄洁，等.激光增材制造技术在航空制造领域的研究与应用进展[J]. 金属加工（热加工），2021（3）：7-14.[12]佚名.最大3D打印发动机钛合金加强框架研制成功[J].特种铸造及有色合金，2019（5）：543.[13]SYED W U H，PINKERTON A J，LI L.A comparative study of wire feeding and powder feeding in direct diode laser deposition for rapid prototyping[J].Applied Surface Science，2005，247（1-4）：268-276.[14]孙进.侧向送丝激光熔敷成型技术的工艺研究及其数值模拟[D].广州：华南理工大学，2015.[15]BRANDL E，MICHAILOV V，VIECHWEGER B，et al.Deposition of Ti-6Al-4V using laser and wire，partⅠ：Microstructural properties of single beads[J]. Surface &Coating Technology，2011（206）：1120-1129.[16]MOK S H，BI G，FOLKES J，et al.Deposition of Ti-6Al-4V using a high power diode laser and wire，PartⅠ：Investigation on the process characteristics[J]. Surface and CoatingTechnology，2008，202（16）：3933-3939.[17]FU Y L ，GUO N，ZHOU L ，et al.Underwater wire feed laser deposition of Ti-6Al-4V titanium alloy[J]. Materials &Design，2020（186）：108284.[18]陈源，姜梦，陈曦，等.光丝同轴激光增材制造研究进展[J].材料科学与工艺，2022，30（2）：16-27.[19]张吉平.三光束光内送丝熔覆实体堆积成形工艺研究[D].苏州：苏州大学，2020.[20]李慧敏.激光熔丝增材制造工艺特性研究[D].重庆：重庆大学，2017.[21]许翔.激光送丝熔敷成形技术的基础及应用研究[D].武汉：华中科技大学，2018.[22]KELBASSA J，GASSER A，BREMER J，et al.Equipment and process windows for laser metal deposition with coaxial wire feeding[J].Journal of Laser Applications，2019（2）：022320.[23]CHURRUCA M M，ARRIZABALACA J L，HERRAIS I，et al.Comparative study of laser metal deposition （LMI） of coaxial wire and power in the manufacture of Ti-6Al-4V structures[J].Dyna（Bilbao），2020，95（1）：376-379.[24]SILZA F，SCHNICK M. SIZOVA I，et al. Laser metal deposition of Ti-6Al-4V with a direct diode laser set?p and coaxial material feed[J].Procedia Manufacturing，2020（47）：1154-1158.[25]CAZAUBON V，AKLE A A，FISCHER X.A parametric study of additive manufacturing process：Ti-6Al-4V laser wire metal deposition[C]//Advances on Mechanics，Design Engineeringand Manufacturing Ⅲ：Proceedings of the International Joint Conference on Mechanics，Design Engineering & Advanced Manufacturing.Toulouse：JCM，2021：15-20.[26]DU F，ZHU J，FU G，et al.Geometry characteristics modeling and process optimization in coaxial laser inside wire cladding[J].Optics & Laser Technology，2018（101）：341-348.

相似文献/References:

[1]许贵芝 编译.不锈钢与钛合金的转接管的焊接[J].焊管,2009,32(11):70.[doi:1001－3938（2009）11－0070－03]
　Edited and Translated by XU Gui-zhi.Welding Between Stainless Steel and Titanium Alloy Different Diameter Transfer Tube[J].,2009,32(8):70.[doi:1001－3938（2009）11－0070－03]
[2]杨 凯,王永军,云海涛,等.TC4钛合金薄壁圆管纵缝TIG焊接模拟与分析[J].焊管,2015,38(7):6.[doi:１００１－３９３８（２０１5）07-0006-05]
　YANG Kai,WANG Yongjun,YUN Haitao,et al.Simulation and Analysis on Longitudinal TIG Welding of TC4 Titanium Alloy Thin-walled Circular Tube[J].,2015,38(8):6.[doi:１００１－３９３８（２０１5）07-0006-05]
[3]张 峰,等.钛合金油井管应用研究现状及进展[J].焊管,2017,40(11):7.[doi:10.19291/j.cnki.1001-3938.2017.11.002]
　ZHANG Feng,HUANG Wenke,LI Yuanzheng,et al.Application Research Status and Progresses of Titanium Alloy OCTG[J].,2017,40(8):7.[doi:10.19291/j.cnki.1001-3938.2017.11.002]
[4]马铁军,王　刚,李文亚,等.钛合金线性摩擦焊界面氧化物“自清理”过程研究[J].焊管,2018,41(3):24.
　MA Tiejun,WANG Gang,LI Wenya,et al.Research on Self-cleaning Behavior of Interfacial Oxide During Titanium Linear Friction Welding[J].,2018,41(8):24.
[5]樊 浩,邢 丽.基于RGB值的钛合金氧化程度数值化评价[J].焊管,2018,41(8):35.[doi:10.19291/j.cnki.1001-3938.2018.08.006]
　FAN Hao,XING Li.Numerical Evaluation of Oxidation Degree of Titanium Alloy Based on RGB Value[J].,2018,41(8):35.[doi:10.19291/j.cnki.1001-3938.2018.08.006]
[6]刘 阳,张贵锋,王士元.钛合金与不锈钢异种金属钎焊的研究进展[J].焊管,2019,42(3):1.[doi:10.19291/j.cnki.1001-3938.2019.3.001]
　LIU Yang,ZHANG Guifeng,WANG Shiyuan.Research Progress on Dissimilar Metal Brazing of Titanium Alloy and Stainless Steel[J].,2019,42(8):1.[doi:10.19291/j.cnki.1001-3938.2019.3.001]
[7]武建勋,王建涛,康文军.钛合金材料电子束焊焊前激光清理工艺研究[J].焊管,2019,42(10):27.[doi:10.19291/j.cnki.1001-3938.2019.10.005]
　WU Jianxun,WANG Jiantao,KANG Wenjun.Study on the Laser Cleaning Technology before EBW of Titanium Alloy[J].,2019,42(8):27.[doi:10.19291/j.cnki.1001-3938.2019.10.005]
[8]何石磊,等.一种适用于钛合金油管气密封螺纹接头的开发[J].焊管,2020,43(9):16.[doi:10.19291/j.cnki.1001-3938.2020.09.004]
　HE Shilei,ZHOU Xinyi,et al.Development of Titanium Alloy Tubing Premium Connection withHigh Gas-tight Performance[J].,2020,43(8):16.[doi:10.19291/j.cnki.1001-3938.2020.09.004]
[9]王显林,陈长青,韩 旭,等.摩擦焊接式全钛合金钻杆焊区性能评价与研究[J].焊管,2021,44(5):19.[doi:10.19291/j.cnki.1001-3938.2021.05.004]
　WANG Xianlin,CHEN Changqing,HAN Xu,et al.Performance Evaluation and Research of Weld Zone for Friction Welded All Titanium Alloy Drill Pipe[J].,2021,44(8):19.[doi:10.19291/j.cnki.1001-3938.2021.05.004]
[10]丁稳稳,刘继雄,刘 晶,等.钛合金焊接接头残余应力超声波检测技术研究[J].焊管,2022,45(6):27.[doi:10.19291/j.cnki.1001-3938.2022.06.005]
　DING Wenwen,LIU Jixiong,LIU Jing,et al.Research on Ultrasonic Testing Technology of Residual Stress in Titanium Alloy Welded Joints[J].,2022,45(8):27.[doi:10.19291/j.cnki.1001-3938.2022.06.005]

备注/Memo

备注/Memo:
收稿日期：2023-01-16
基金项目：国防基础科研计划（项目编号JCKY2021206B039）。
作者简介：符成学（1993—），男，河南南阳人，硕士，工程师，主要研究方向为钛合金激光焊接和增材制造。
更新日期/Last Update: 2023-08-24