[1]胡丽华,张雷,路民旭.1Cr低合金管线钢焊接接头组织和性能研究[J].焊管,2009,32(7):18-21.[doi:1001－3938（2009）07－0018－04]
　HU Li-hua,ZHANG Lei,LU Min-xu.Research on Microstructure and Mechanical Properties of1Cr Low Alloy Pipeline Steel Weld Joint[J].,2009,32(7):18-21.[doi:1001－3938（2009）07－0018－04]
点击复制

1Cr低合金管线钢焊接接头组织和性能研究
分享到：

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
32
期数:
2009年第7期
页码:
18-21
栏目:
试验与研究
出版日期:
2009-07-28

文章信息/Info

Title:
Research on Microstructure and Mechanical Properties of1Cr Low Alloy Pipeline Steel Weld Joint
文章编号:
1001－3938（2009）07－0018－04
作者:
胡丽华; 张雷; 路民旭
（北京科技大学 材料科学与工程学院，北京 100083）
Author(s):
HU Li-hua; ZHANG Lei; LU Min-xu
(School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083,China)
关键词:
1Cr低合金管线钢; 焊接接头; 组织; 性能
Keywords:
1Cr low alloy pipeline steel; weld joint; structure; mechanical properties
分类号:
TG407
DOI:
1001－3938（2009）07－0018－04
文献标志码:
A
摘要:
采用TIG焊对1Cr低合金管线钢进行了焊接，研究了焊接接头的显微组织、力学性能和耐蚀性，探讨了1Cr低合金钢的焊接性能。结果表明，以铁素体组织为主要特征的母材和热影响区具有较好的冲击韧性，冲击吸收功较高；以粒状贝氏体组织为主的焊缝区，韧性较母材和热影响区稍差。焊接接头的最高硬度为250HV，出现在熔合线附近，整体硬度适中。在管线钢中加入1%Cr未明显降低接头热影响区韧性或提高硬度，表明1Cr低合金管线钢具有较好的焊接性。
Abstract:
1Cr low alloy pipeline steel was welded by tungsten inert gas welding (TIG) technology.Then the microstructure,mechanical properties and corrosion resistance of the weld joint were studied,and weldability of 1Cr low alloy steel was discussed.The results showed that base metal and heat-affected zone (HAZ) was with good toughness and higher impact absorbed energy,and ferrite was its main structure; the toughness of weld metal was lower than that of base metal and HAZ,and its main structure was granular bainite.The highest hardness value of the weld joint was 250HV,which locates in the fusion line; the overall hardness was moderate.Adding 1%Cr to the low alloy steel didn’t increase the hardness or reduce the toughness of the HAZ,so the weldability of the pipeline steel was excellent.

参考文献/References:

［1］PIGLIACAMPO L,GONZALES J C,TURCONI G L,et al.Window of Application an Operational Track of Low Carbon 3Cr Steel Tubular［C］∥NACE Corrosion.Houston：NACE，2006：133.
［2］王献昉, 董振江, 梁拥军, 等. 经济型低Cr抗CO2腐蚀合金石油管材钢开发现状［J］.腐蚀科学与防护技术，2006,18(6):436-439.
［3］张忠铧,黄子阳,孙元宁,等.3Cr抗CO2和H2S腐蚀系列油套管开发［J］.宝钢技术，2006(3):5-8.
［4］MURAKI T,NOSE K,ASAHI H.Development of 3% Chromium Linepipe Steel［C］∥NACE Corrosion.Houston：NACE，2003：117.
［5］尹士科.焊接材料实用基础知识［M］.北京:化学工业出版社,2004.
［6］金晓军,霍立兴,张玉凤.X65管线钢焊接接头的显微组织和低温韧性研究［J］.焊管，2002,25(6):12-14.

相似文献/References:

[1]李鹤林,李 霄,吉玲康,等.油气管道基于应变的设计及抗大变形管线钢的开发与应用[J].焊管,2007,30(5):5.[doi:1001-3938（2007）05-0005-07]
　LI He-lin,LI Xiao,JI Ling-kang,et al.Strainbased Design for Pipeline and Development of Pipe Steels with High Deformation Resistance[J].,2007,30(7):5.[doi:1001-3938（2007）05-0005-07]
[2]尹长华,闫 臣.厚壁钢管自保护药芯焊丝半自动焊接头氢含量较高的原因及控制措施[J].焊管,2008,31(2):71.[doi:1001－3938（2008）02－0071－04]
　YIN Chang-hua,YAN Chen.Origin and Control Measure of Thick Wall Steel Pipe Welded Joint Contain Mach Hydrogen for Self-shielded Flux-cored Wire Semiautomatic Welding[J].,2008,31(7):71.[doi:1001－3938（2008）02－0071－04]
[3]许贵芝 编译.国外干线管道焊接接头的加热和热处理[J].焊管,2008,31(5):89.[doi:1001－3938（2008）05－0089－02]
　Edited and translated by XU Gui-zhi.Heating and Heat Treatment of Welding Jointer in the Abroad Trunk Pipeline[J].,2008,31(7):89.[doi:1001－3938（2008）05－0089－02]
[4]许贵芝 编译.俄罗斯不锈钢管道焊接接头的局部热处理[J].焊管,2009,32(1):61.[doi:1001－3938（2009）01－0061－04]
　Edited and Translated by XU Gui-zhi.Part Heat Treatment of Stainless Steel Pipeline Welding Joints in Russia[J].,2009,32(7):61.[doi:1001－3938（2009）01－0061－04]
[5]何小东,马秋荣,王长安,等.高强度管线钢焊接接头不同缺口位置的断裂韧性研究[J].焊管,2009,32(8):21.[doi:1001－3938（2009）08－0021－05]
　HE Xiao-dong,MA Qiu-rong,WANG Chang-an,et al.Fracture Toughness of Welded joints at Different Notch Location and Discussion of Specifications for High Strength line Pipe[J].,2009,32(7):21.[doi:1001－3938（2009）08－0021－05]
[6]苏丽珍,何莹,李桂芝,等.高强管线钢管道环焊缝高强匹配研究[J].焊管,2009,32(9):27.[doi:1001－3938（2009）09－0027－04]
　SU Li-zhen,HE Ying,LI Gui-zhi,et al.High Strength Matching Study on Circumferential Weld of High Grade Line Pipe[J].,2009,32(7):27.[doi:1001－3938（2009）09－0027－04]
[7]邵晓东,刘养勤,李瑛,等.X80钢管件焊接接头中Ni含量分析方法研究[J].焊管,2010,33(3):29.[doi:1001－3938（2010）0３－0029－04]
　SHAO Xiao-dong,LIU Yang-qin,LI Ying,et al.Study on Analytical Method for Nickel Contentin Welded Joints of X80 Grade Fittings[J].,2010,33(7):29.[doi:1001－3938（2010）0３－0029－04]
[8]王香云.12Cr1MoVG钢焊接接头热裂纹的原因分析及对策[J].焊管,2010,33(4):13.[doi:1001－3938（2010）0４－0013－05]
　WANG Xiang-yun.12Cr1MoVG steel welding joint hot cracking reason analysis and countermeasures[J].,2010,33(7):13.[doi:1001－3938（2010）0４－0013－05]
[9]李建一,田　鹏,孙志刚,等.螺旋埋弧焊管二步法焊接接头性能分析[J].焊管,2011,34(12):69.[doi:1001-3938（2011）12-0069-04]
　LI Jian-yi,TIAN Peng,SUN Zhi-gang,et al.Analysis on Welded Joint Performance of Two-step Welding SAWH Pipe[J].,2011,34(7):69.[doi:1001-3938（2011）12-0069-04]
[10]张念涛,徐连勇,韩永典,等.X65/316L耐蚀合金内衬管焊接接头CO2腐蚀行为研究[J].焊管,2012,35(1):8.[doi:１００１－３９３８（２０１２）０１-0008-05]
　ZHANG Nian-tao,XU Lian-yong,HAN Yong-dian,et al.Study on the CO2 Corrosion Behavior of X65/316L Corrosion Resistant Alloy Liner Pipe Welded Joint[J].,2012,35(7):8.[doi:１００１－３９３８（２０１２）０１-0008-05]

备注/Memo

备注/Memo:
作者简介：胡丽华（1980-），女，博士研究生，研究方向为低合金钢焊接工艺及焊接接头组织和性能。
收稿日期：2008－11－04
更新日期/Last Update: