相似文献/References:
[1]许良红,陈延清,牛 辉.焊接热循环对高Nb X70级管线钢热影响区组织和韧性的影响[J].焊管,2009,32(5):18.[doi:1001－3938（2009）05－0018－04]
XU Liang-hong,CHEN Yan-qing,NIU Hui.Effect on HAZ Structure and Toughness of Welding Thermal Cycle for High Nb X70 Grade Pipeline Steel[J].,2009,32(5):18.[doi:1001－3938（2009）05－0018－04]
[2]张伟卫,李 洋,李 鹤,等.X100高强度管线钢管力学性能研究及试验分析[J].焊管,2011,34(10):16.[doi:1001-3938(2011)10-0016-04]
ZHANG Wei-wei,LI Yang,LI He,et al.Structure and Welding Performance Study on X100 Line Pipe with High Strength[J].,2011,34(5):16.[doi:1001-3938(2011)10-0016-04]
[3]党 民,吕 能,李昱坤 编译李云龙,等.TAP项目X100钢管的制造[J].焊管,2011,34(11):75.[doi:1001-3938（2011）11-0075-06]
Edited and Translated by DANG Min,LV Neng,LI Yu-kunChecked by LI Yun-long,et al.The Manufacture of X100 Steel Pipes for TAP Project[J].,2011,34(5):75.[doi:1001-3938（2011）11-0075-06]
[4]刘振双.GCr15钢焊管轧辊的热处理工艺[J].焊管,2012,35(2):37.[doi:１００１－３９３８（２０１２）０２-0037-04]
LIU Zhen-shuang.Heat Treatment Process of Welded Pipe Roller Made by GCr15 Steel[J].,2012,35(5):37.[doi:１００１－３９３８（２０１２）０２-0037-04]
[5]于 磊,李志宏,王国平,等.X80M管线钢焊接接头性能研究[J].焊管,2013,36(12):19.[doi:１００１－３９３８（２０１3）12-0019-04]
YU Lei,LI Zhihong,WANG Guoping,et al.Research on X80M Pipeline Steel Welded Joint[J].,2013,36(5):19.[doi:１００１－３９３８（２０１3）12-0019-04]
[6]李国鹏,韩秀林,赵 波,等.X80和X90管线钢热影响区组织与韧性对比[J].焊管,2014,37(7):13.[doi:１００１－３９３８（２０１4）07-0013-05]
LI Guopeng,HAN Xiulin,ZHAO Bo,et al.Comparison of Microstructure and Toughness of X80 and X90 Pipeline Heat-affected Zone (HAZ)[J].,2014,37(5):13.[doi:１００１－３９３８（２０１4）07-0013-05]
[7]刘振伟,田 鹏,王志太,等.X90和X100管线钢管HAZ夏比冲击韧性研究[J].焊管,2014,37(8):30.[doi:１００１－３９３８（２０１4）08-0030-04]
LIU Zhenwei,TIAN Peng,WANG Zhitai,et al.tudy on Charpy Impact Toughness of X90 and X100 Line Pipe Heat Affected Zone (HAZ)[J].,2014,37(5):30.[doi:１００１－３９３８（２０１4）08-0030-04]
[8]马 璇,等.MA的形成过程和分布对高强度管线钢力学性能的影响[J].焊管,2016,39(5):64.[doi:10.19291/j.cnki.1001-3938.2016.05.012]
Edited and Translated by MA Xuan,WANG Hui,LIU Gangwei,et al.Effects of Distribution and the Formation Process of MA on Deformation and Toughness of High Strength Linepipe Steel[J].,2016,39(5):64.[doi:10.19291/j.cnki.1001-3938.2016.05.012]
[9]袁雪婷,等.组织特征对高强管线钢焊缝及热影响区韧性的影响[J].焊管,2017,40(11):22.[doi:10.19291/j.cnki.1001-3938.2017.11.005]
Influence of Microstructure Characteristics on the Toughness of High Strength Pipeline Steel Weld and Heat Affected Zone.[J].,2017,40(5):22.[doi:10.19291/j.cnki.1001-3938.2017.11.005]
[10]刘迎来,许 彦,王高峰,等.中俄东线－45 ℃低温环境油气管道工程用X80钢级Φ1 422 mm×33.8 mm感应加热弯管研发[J].焊管,2019,42(7):48.[doi:10.19291/j.cnki.1001-3938.2019.7.005]
LIU Yinglai,XU Yan,WANG Gaofeng,et al.Development of X80 Φ1 422 mm×33.8 mm Induction Heating Bend for China-RussiaEast Nature Gas Pipeline Project in －45 ℃ Low Temperature Environment[J].,2019,42(5):48.[doi:10.19291/j.cnki.1001-3938.2019.7.005]