[1]朱斌燕,路广平,于 宾,等.HFW焊管静水压试验渗水缺陷分析[J].焊管,2011,34(8):49-52.
点击复制

HFW焊管静水压试验渗水缺陷分析
分享到:

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
34
期数:
2011年第8期
页码:
49-52
栏目:
经验交流
出版日期:
2011-08-28

文章信息/Info

Title:
Analyse for seep water defect of hydraulic pressure test
作者:
朱斌燕路广平于 宾任国庆翁 文
关键词:
HFW焊管静水压试验焊接缺陷穿透裂纹
摘要:
针对某X65级?准 323.9 mm × 6.4 mm高频直缝焊管在静水压试验过程中出现的渗水现象,对渗水钢管进行了压扁试验,并在SEM(扫描电子显微镜)下对断口形貌进行了分析。结果表明,焊管渗水的主要原因是焊缝中存在穿透性裂纹,而形成穿透性裂纹的原因是焊缝中心处存在焊接缺陷,这种缺陷在外力作用下,就会扩展到内外表面最终开裂。

参考文献/References:

[1] 介升旗,高频焊电极打火对钢管质量和生产的影响[J]. 焊管, 2000 ,23(6):47-49.
[2] 吕拴录,赵新伟,罗金恒,等. ERW输油管道试压爆裂原因分析及安全评价[J]. 焊管,2005(4):19-22.

相似文献/References:

[1]张 喆,周月明,白云峰,等.HFW中频热处理线圈结构对加热效果的影响[J].焊管,2009,32(1):41.[doi:1001-3938(2009)01-0041-05]
 ZHANG Zhe,ZHOU Yue-ming,BAI Yun-feng,et al.Loop Structure of HFW Intermediate Frequency Heating Treatment Effect to Heating[J].,2009,32(8):41.[doi:1001-3938(2009)01-0041-05]
[2]季晓鹏,张浩,马会文.国内外大中直径HFW焊管工艺发展研究[J].焊管,2009,32(8):10.[doi:1001-3938(2009)08-0010-06]
 JI Xiao-peng,ZHANG Hao,MA Hui-wen.Discussion on the Development and Research of the Technology of Large Diameter Hi-quality HFW Pipe in Abroad and Domestic[J].,2009,32(8):10.[doi:1001-3938(2009)08-0010-06]
[3]王涛.HFW焊管生产N80Q、P110级套管和油管的工艺开发[J].焊管,2009,32(9):35.[doi:1001-3938(2009)09-0035-03]
 WANG Tao.Process Development of HFW N80Q,P110 Grade Casing and Tubing[J].,2009,32(8):35.[doi:1001-3938(2009)09-0035-03]
[4]邵毅.ERW钢管内毛刺清除设备分析[J].焊管,2009,32(9):44.[doi:1001-3938(2009)09-0044-03]
 SHAO Yi.Inside Burrs Clearing Equipment Analysis of HFW Steel Pipe[J].,2009,32(8):44.[doi:1001-3938(2009)09-0044-03]
[5]邵毅.HFW焊管内毛刺清除刀具的选用[J].焊管,2009,32(12):40.[doi:1001-3938(2009)12-0040-03]
 SHAO Yi.Inside Burr Elimination Scraper Selection for HFW Pipe[J].,2009,32(8):40.[doi:1001-3938(2009)12-0040-03]
[6]孙凤龙,戴学余,周玉林,等.宝钢HFW焊管生产线去内毛刺刀杆研制[J].焊管,2010,33(1):37.[doi:1001-3938(2010)01-0037-04]
 SUN Feng-long,DAI Xue-yu,ZHOU Yu-lin,et al.Development of Scraper Bar for Burr Wiped off of HFW Pipe Line of Baosteel[J].,2010,33(8):37.[doi:1001-3938(2010)01-0037-04]
[7]彭在美.从国产连续油管成功研制看我国焊管产品结构调整[J].焊管,2010,33(4):5.[doi:1001-3938(2010)04-0005-05]
 PENG Zai-mei.Analyzing Structure Adjustment of China Welded Pipe Product from Successful Trial-production of Domestic Coiled Tubing[J].,2010,33(8):5.[doi:1001-3938(2010)04-0005-05]
[8]肖国章,高霞,李六五.带钢质量对ERW焊管质量的影响[J].焊管,2010,33(4):55.[doi:1001-3938(2010)04-0055-03]
 XIAO Guo-zhang,GAO Xia,LI Liu-wu.The Quality Of ERW Pipe Impacted By Strip Quality[J].,2010,33(8):55.[doi:1001-3938(2010)04-0055-03]
[9]张永,马东利.HFW焊管生产线乳化液回收泵站的改进[J].焊管,2010,33(6):45.[doi:1001-3938(2010)06-0045-02]
 ZHANG Yong,MA Dong-li.Emulsion Recycling Pump Station Alteration of HFW Production Line[J].,2010,33(8):45.[doi:1001-3938(2010)06-0045-02]
[10]赖兴涛,崔俊.HFW焊管制管各工序质量控制[J].焊管,2010,33(10):60.[doi:1001-3938(2010)10-0060-05]
 LAI Xing-tao,CUI Jun.Quality Control of HFW Pipe Each Procedure During Production[J].,2010,33(8):60.[doi:1001-3938(2010)10-0060-05]

备注/Memo

备注/Memo:
作者简介:朱斌燕(1982—),男,河北沧州人,助理工程师,主要从事HFW焊管成型与焊接工艺研究。
更新日期/Last Update: