[1]许贵芝.俄罗斯干线油气管道焊接加热方法探讨[J].焊管,2012,35(6):69-71.[doi:１００１－３９３８（２０１２）０6-0069-03]
　Edited and Translated by XU Gui-zhi.Discussion on Welding Heating Method for Russia Trunk Oil & Gas Pipeline[J].,2012,35(6):69-71.[doi:１００１－３９３８（２０１２）０6-0069-03]
点击复制

俄罗斯干线油气管道焊接加热方法探讨
分享到：

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
35
期数:
2012年第6期
页码:
69-71
栏目:
国外焊管
出版日期:
2012-06-28

文章信息/Info

Title:
Discussion on Welding Heating Method for Russia Trunk Oil & Gas Pipeline
文章编号:
１００１－３９３８（２０１２）０6-0069-03
作者:
许贵芝
（南京航空附件厂，南京 210002）
Author(s):
Edited and Translated by XU Gui-zhi
（Nanjing Aviation Accessories Factory， Nanjing 210002， China）
关键词:
干线油气管道; 焊接接头; 焊接加热; КЭН型电加热器
Keywords:
trunk oil &;  gas pipeline;  welded joint;  welding heating;  КЭН electric heater
分类号:
TG457.6
DOI:
１００１－３９３８（２０１２）０6-0069-03
文献标志码:
A
摘要:
提出了干线油气管道焊接加热的优点和必要性；介绍了俄罗斯焊接加热的技术规范，并与美、英两国的焊接加热方式进行比较。阐述了俄罗斯干线油气管道焊接加热的方法及专家对这些方法的分析和探讨，并针对俄罗斯焊接加热的相关技术文件提出了补充和修改建议。最后，对我国管道焊接加热方式提出了建设性意见。
Abstract:
In this article， the advantage and necessity of welding heating for trunk oil & gas pipeline were put forward， the Russia technical specifications of welding heating were introduced， and the technical specifications of Russia， America and England were compared . The welding heating method of Russia trunk oil & gas pipeline， the analysis and discussion from experts to the said method were expatiated . Aiming at Russia technical documents， some supplements and amendment advice were put forward. In the end， constructive suggestion for China welding heating mode was brought forward .

参考文献/References:

译自：КОРОЛЬКОВ П М. Рациональные Методы Подогревапри Сварке Стыков Трубопроводов.Сварочное Производство.2010（09）：52-56.
—————————

相似文献/References:

[1]李鹤林,李 霄,吉玲康,等.油气管道基于应变的设计及抗大变形管线钢的开发与应用[J].焊管,2007,30(5):5.[doi:1001-3938（2007）05-0005-07]
　LI He-lin,LI Xiao,JI Ling-kang,et al.Strainbased Design for Pipeline and Development of Pipe Steels with High Deformation Resistance[J].,2007,30(6):5.[doi:1001-3938（2007）05-0005-07]
[2]尹长华,闫 臣.厚壁钢管自保护药芯焊丝半自动焊接头氢含量较高的原因及控制措施[J].焊管,2008,31(2):71.[doi:1001－3938（2008）02－0071－04]
　YIN Chang-hua,YAN Chen.Origin and Control Measure of Thick Wall Steel Pipe Welded Joint Contain Mach Hydrogen for Self-shielded Flux-cored Wire Semiautomatic Welding[J].,2008,31(6):71.[doi:1001－3938（2008）02－0071－04]
[3]许贵芝 编译.俄罗斯不锈钢管道焊接接头的局部热处理[J].焊管,2009,32(1):61.[doi:1001－3938（2009）01－0061－04]
　Edited and Translated by XU Gui-zhi.Part Heat Treatment of Stainless Steel Pipeline Welding Joints in Russia[J].,2009,32(6):61.[doi:1001－3938（2009）01－0061－04]
[4]胡丽华,张雷,路民旭.1Cr低合金管线钢焊接接头组织和性能研究[J].焊管,2009,32(7):18.[doi:1001－3938（2009）07－0018－04]
　HU Li-hua,ZHANG Lei,LU Min-xu.Research on Microstructure and Mechanical Properties of1Cr Low Alloy Pipeline Steel Weld Joint[J].,2009,32(6):18.[doi:1001－3938（2009）07－0018－04]
[5]何小东,马秋荣,王长安,等.高强度管线钢焊接接头不同缺口位置的断裂韧性研究[J].焊管,2009,32(8):21.[doi:1001－3938（2009）08－0021－05]
　HE Xiao-dong,MA Qiu-rong,WANG Chang-an,et al.Fracture Toughness of Welded joints at Different Notch Location and Discussion of Specifications for High Strength line Pipe[J].,2009,32(6):21.[doi:1001－3938（2009）08－0021－05]
[6]苏丽珍,何莹,李桂芝,等.高强管线钢管道环焊缝高强匹配研究[J].焊管,2009,32(9):27.[doi:1001－3938（2009）09－0027－04]
　SU Li-zhen,HE Ying,LI Gui-zhi,et al.High Strength Matching Study on Circumferential Weld of High Grade Line Pipe[J].,2009,32(6):27.[doi:1001－3938（2009）09－0027－04]
[7]邵晓东,刘养勤,李瑛,等.X80钢管件焊接接头中Ni含量分析方法研究[J].焊管,2010,33(3):29.[doi:1001－3938（2010）0３－0029－04]
　SHAO Xiao-dong,LIU Yang-qin,LI Ying,et al.Study on Analytical Method for Nickel Contentin Welded Joints of X80 Grade Fittings[J].,2010,33(6):29.[doi:1001－3938（2010）0３－0029－04]
[8]王香云.12Cr1MoVG钢焊接接头热裂纹的原因分析及对策[J].焊管,2010,33(4):13.[doi:1001－3938（2010）0４－0013－05]
　WANG Xiang-yun.12Cr1MoVG steel welding joint hot cracking reason analysis and countermeasures[J].,2010,33(6):13.[doi:1001－3938（2010）0４－0013－05]
[9]李建一,田　鹏,孙志刚,等.螺旋埋弧焊管二步法焊接接头性能分析[J].焊管,2011,34(12):69.[doi:1001-3938（2011）12-0069-04]
　LI Jian-yi,TIAN Peng,SUN Zhi-gang,et al.Analysis on Welded Joint Performance of Two-step Welding SAWH Pipe[J].,2011,34(6):69.[doi:1001-3938（2011）12-0069-04]
[10]张念涛,徐连勇,韩永典,等.X65/316L耐蚀合金内衬管焊接接头CO2腐蚀行为研究[J].焊管,2012,35(1):8.[doi:１００１－３９３８（２０１２）０１-0008-05]
　ZHANG Nian-tao,XU Lian-yong,HAN Yong-dian,et al.Study on the CO2 Corrosion Behavior of X65/316L Corrosion Resistant Alloy Liner Pipe Welded Joint[J].,2012,35(6):8.[doi:１００１－３９３８（２０１２）０１-0008-05]
[11]许贵芝 编译.国外干线管道焊接接头的加热和热处理[J].焊管,2008,31(5):89.[doi:1001－3938（2008）05－0089－02]
　Edited and translated by XU Gui-zhi.Heating and Heat Treatment of Welding Jointer in the Abroad Trunk Pipeline[J].,2008,31(6):89.[doi:1001－3938（2008）05－0089－02]

备注/Memo

备注/Memo:
译者简介：许贵芝，男，高级工程师，南京市焊接学会前委员，长期从事俄文的翻译工作。
更新日期/Last Update: