[1]许贵芝 编译.13ХФА钢石油管道焊接接头耐蚀性能改善的研究[J].焊管,2013,36(1):68-72.[doi:１００１－３９３８（２０１3）01-0068-05]
　Edited and Translated by XU Guizhi.Research on Improving Corrosion Resistance Property of Welded Joints of 13ХФА Steel Oil Pipeline[J].,2013,36(1):68-72.[doi:１００１－３９３８（２０１3）01-0068-05]
点击复制

13ХФА钢石油管道焊接接头耐蚀性能改善的研究
分享到：

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
36
期数:
2013年第1期
页码:
68-72
栏目:
国外焊管
出版日期:
2013-01-28

文章信息/Info

Title:
Research on Improving Corrosion Resistance Property of Welded Joints of 13ХФА Steel Oil Pipeline
文章编号:
１００１－３９３８（２０１3）01-0068-05
作者:
许贵芝 编译
（南京航空附件厂，南京 210002）
Author(s):
Edited and Translated by XU Guizhi
（Nanjing Aviation Accessories, Nanjing 210002, China）
关键词:
关键词：13ХФА钢; 焊接接头; 高频焊接; 耐腐蚀稳定性
Keywords:
Key words: 13ХФА steel;  welded joint;  high frequency welding;  anti-corrosion stability
分类号:
TG113.26
DOI:
１００１－３９３８（２０１3）01-0068-05
文献标志码:
A
摘要:
介绍了一种采用高频焊接、焊后720 ℃回火热处理工艺生产13ХФА钢石油管道的方法。研究结果表明，焊接接头具有铁素体-珠光体组织，其金相组织、力学性能与母材接近，并具有较高的耐蚀稳定性。在大量试验研究的基础上，综合最高耐蚀性能和力学性能试样的金相组织，研制出能迅速评估焊接接头耐蚀性是否可靠的13ХФА钢管道焊接接头组织标样，为石油管道的安全使用提供了一种快速简便的对照评估方法。
Abstract:
In this article, it introduced a kind of method to produce 13ХФА steel oil pipeline by high frequency welding and tempering treatment after 720 ℃. The results showed that welded joint possess ferrite-pearlite structure, the metallographic structure and mechanical performance are close to base metal, and is with high anti-corrosion stability. Based on a lot of tests, combined with the highest corrosion resistance property and the metallographic structure of mechanical performance specimen, the structure standard sample of 13ХФА steel pipeline welded joint was developed, which can quickly assess whether the corrosion resistance is reliable, and this kind of assessment method is quick and simple.

参考文献/References:

译自：ВЫБОЙЩИК Л М ИT. Л . Обеспечение Коррозионной Стойкости Сварных Соединений Нефтепроводных Трубна Уровне Свариваемого Металла.Сварочное Лроизводство.2011（01）：22-27.
—————————

相似文献/References:

[1]李鹤林,李 霄,吉玲康,等.油气管道基于应变的设计及抗大变形管线钢的开发与应用[J].焊管,2007,30(5):5.[doi:1001-3938（2007）05-0005-07]
　LI He-lin,LI Xiao,JI Ling-kang,et al.Strainbased Design for Pipeline and Development of Pipe Steels with High Deformation Resistance[J].,2007,30(1):5.[doi:1001-3938（2007）05-0005-07]
[2]尹长华,闫 臣.厚壁钢管自保护药芯焊丝半自动焊接头氢含量较高的原因及控制措施[J].焊管,2008,31(2):71.[doi:1001－3938（2008）02－0071－04]
　YIN Chang-hua,YAN Chen.Origin and Control Measure of Thick Wall Steel Pipe Welded Joint Contain Mach Hydrogen for Self-shielded Flux-cored Wire Semiautomatic Welding[J].,2008,31(1):71.[doi:1001－3938（2008）02－0071－04]
[3]许贵芝 编译.国外干线管道焊接接头的加热和热处理[J].焊管,2008,31(5):89.[doi:1001－3938（2008）05－0089－02]
　Edited and translated by XU Gui-zhi.Heating and Heat Treatment of Welding Jointer in the Abroad Trunk Pipeline[J].,2008,31(1):89.[doi:1001－3938（2008）05－0089－02]
[4]许贵芝 编译.俄罗斯不锈钢管道焊接接头的局部热处理[J].焊管,2009,32(1):61.[doi:1001－3938（2009）01－0061－04]
　Edited and Translated by XU Gui-zhi.Part Heat Treatment of Stainless Steel Pipeline Welding Joints in Russia[J].,2009,32(1):61.[doi:1001－3938（2009）01－0061－04]
[5]胡丽华,张雷,路民旭.1Cr低合金管线钢焊接接头组织和性能研究[J].焊管,2009,32(7):18.[doi:1001－3938（2009）07－0018－04]
　HU Li-hua,ZHANG Lei,LU Min-xu.Research on Microstructure and Mechanical Properties of1Cr Low Alloy Pipeline Steel Weld Joint[J].,2009,32(1):18.[doi:1001－3938（2009）07－0018－04]
[6]何小东,马秋荣,王长安,等.高强度管线钢焊接接头不同缺口位置的断裂韧性研究[J].焊管,2009,32(8):21.[doi:1001－3938（2009）08－0021－05]
　HE Xiao-dong,MA Qiu-rong,WANG Chang-an,et al.Fracture Toughness of Welded joints at Different Notch Location and Discussion of Specifications for High Strength line Pipe[J].,2009,32(1):21.[doi:1001－3938（2009）08－0021－05]
[7]苏丽珍,何莹,李桂芝,等.高强管线钢管道环焊缝高强匹配研究[J].焊管,2009,32(9):27.[doi:1001－3938（2009）09－0027－04]
　SU Li-zhen,HE Ying,LI Gui-zhi,et al.High Strength Matching Study on Circumferential Weld of High Grade Line Pipe[J].,2009,32(1):27.[doi:1001－3938（2009）09－0027－04]
[8]邵晓东,刘养勤,李瑛,等.X80钢管件焊接接头中Ni含量分析方法研究[J].焊管,2010,33(3):29.[doi:1001－3938（2010）0３－0029－04]
　SHAO Xiao-dong,LIU Yang-qin,LI Ying,et al.Study on Analytical Method for Nickel Contentin Welded Joints of X80 Grade Fittings[J].,2010,33(1):29.[doi:1001－3938（2010）0３－0029－04]
[9]王香云.12Cr1MoVG钢焊接接头热裂纹的原因分析及对策[J].焊管,2010,33(4):13.[doi:1001－3938（2010）0４－0013－05]
　WANG Xiang-yun.12Cr1MoVG steel welding joint hot cracking reason analysis and countermeasures[J].,2010,33(1):13.[doi:1001－3938（2010）0４－0013－05]
[10]李建一,田　鹏,孙志刚,等.螺旋埋弧焊管二步法焊接接头性能分析[J].焊管,2011,34(12):69.[doi:1001-3938（2011）12-0069-04]
　LI Jian-yi,TIAN Peng,SUN Zhi-gang,et al.Analysis on Welded Joint Performance of Two-step Welding SAWH Pipe[J].,2011,34(1):69.[doi:1001-3938（2011）12-0069-04]

备注/Memo

备注/Memo:
译者简介:许贵芝，男，高级工程师，南京市焊接学会前委员，长期从事俄文的翻译工作。
更新日期/Last Update: