[1]武 刚,等.X70管线钢焊接接头在拉伸过程中的力学响应及性能关系[J].焊管,2020,43(8):7-12.[doi:10.19291/j.cnki.1001-3938.2020.08.002]
　WU Gang,WANG Nan,et al.Relationship between Mechanical Response and Properties of X70 Pipeline Steel Welded Joints during Stretching[J].,2020,43(8):7-12.[doi:10.19291/j.cnki.1001-3938.2020.08.002]
点击复制

X70管线钢焊接接头在拉伸过程中的
力学响应及性能关系()
分享到：

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
43
期数:
2020年第8期
页码:
7-12
栏目:
试验与研究
出版日期:
2020-08-28

文章信息/Info

Title:
Relationship between Mechanical Response and Properties of
X70 Pipeline Steel Welded Joints during Stretching
文章编号:
10.19291/j.cnki.1001-3938.2020.08.002
作者:
武 刚1;  2; 王 楠3; 冯 菁4; 李 娜1;  2; 李丽锋1;  2; 朱丽霞1;  2
1. 石油管材及装备材料服役行为与结构安全国家重点实验室， 西安 710077；
2. 中国石油集团石油管工程技术研究院， 西安 710077；
3. 长安大学 材料科学与工程学院， 西安 710061；
4. 中国石油宝鸡石油机械有限责任公司， 陕西 宝鸡 721002
Author(s):
WU Gang1;  2;  WANG Nan3;  FENG Jing4;  LI Na1;  2;  LI Lifeng1;  2;  ZHU Lixia1;  2
1. CNPC Key Laboratory for PetroChina Tubular Goods Engineering, Xi’an 710077, China;
2. CNPC Tubular Goods Research Institute, Xi’an 710077, China;
3. School of Materials Science and Engineering, Chang’an University, Xi’an 710061, China;
4. CNPC Baoji Oilfield Machinery Co., Ltd., Baoji 721002, Shaanxi, China
关键词:
焊接接头; 组织形貌; 焊缝区; 热影响区; 应变响应
Keywords:
welded joint; microstructure and morphology; weld zone; heat affected zone; strain response
分类号:
TG407
DOI:
10.19291/j.cnki.1001-3938.2020.08.002
文献标志码:
A
摘要:
以X70螺旋埋弧焊管焊接接头为研究对象，采用XTDIC系统测量拉伸过程中母材、焊缝和热影响区的实时应变响应情况，并通过粘贴应变片的电测法获得各区域应变分布曲线，以此为基础研究焊接接头各区域协同变形规律。结果表明：在拉应力的作用下，应变主要集中在焊缝区域，应变量远远大于其他区域，焊缝区域彼此咬合、交错分布的晶粒可有效增加晶界与内部位错的流动阻力，具有较高的应变硬化速率。随着外加应力的持续增加，流动应力开始向热影响区扩散，形成应力集中而断裂。研究结果可以为管线钢焊接工艺设计及塑性变形条件下安全评价提供理论基础和试验依据。
Abstract:
Taking X70 pipeline steel welded joint as the research object, the XTDIC system is used to measure the real-time strain response of the base metal the weld and the heat affected zone during the stretching process. The strain distribution curve of each zone is obtained by electrical measurement method of pasting strain gauges, on the basis of which the coordinated deformation law of each zone of the welded joint is studied. The results show that the strain is mainly concentrated in the weld zone under the action of tensile stress, and the strain variable is much larger than other zones. The staggered grain in weld zone can effectively increase the flow resistance of grain boundaries and internal dislocations, which has a higher strain hardening rate. As the applied stress continues to increase, the flow stress begins to diffuse into the heat affected zone, forming stress concentration and breaking. The research results can provide theoretical and experimental basis for pipeline steel welding process design and safety evaluation under plastic deformation conditions.

参考文献/References:

[1] QIAO G Y，CHEN X W，HAN X L，et al. Mechanical properties of high-Nb X80 steel weld pipes for the second west-to-east gas transmission pipeline project[J]. Advances in Materials Science and Engineering，2017（3）：1-13.
[2] 闵祥玲，王晓香，万金涛，等. 应变时效对高强度管线钢管的影响[J]. 焊管，2010，33（4）：66-71.
[3] LI J，SU L，LU C，et al. The evolution of microtexture of pipeline steel from strip to bare pipe to coated pipe[J]. Procedia Engineering，2017（207）：1844-1849.
[4] FUKUDA N，YATABE H，KAWAGUCHI S，et al. Experimental and analytical study of cold bending process for pipelines[J]. Journal of Offshore Mechanics and Arctic Engineering，2003（125）：153-157.
[5] 孔德军，叶存冬，郭卫. X80管线钢焊接接头拉伸断裂行为与断口形貌分析[J]. 建筑材料学报，2015，18（1）：139-144.
[6] 潘川，喻萍，田志凌. 自保护药芯焊丝焊接X70管线钢接头力学性能和微观组织特点[J]. 焊接学报，2007（11）：96-99.
[7] BAI F，DING H，TONG L，et al. Microstructure and properties of the interlayer heat-affected zone in X80 pipeline girth welds[J]. Progress in Natural Science：Materials International，2020，30（1）：110-117.
[8] CHEN H Y，NIU J，CHI Q，et al. Strain capacity of girth weld joint cracked at “near-seam zone”[J]. International Journal of Pressure Vessels and Piping，2016（139）：77-85.
[9] NI D R，CHEN D L，WANG D，et al. Tensile properties and strain-hardening behaviour of friction stir welded SiCp/AA2009 composite joints[J]. Materials Science & Engineer-ing A，2014，608（7）：1-10.
[10] LIN S，WANG D，LI C，et al. Effect of cyclic plastic deformation on microstructure and mechanical properties of weld metals used for reel-lay pipeline steels[J]. Materials Science & Engineering，2018，737（8）：77-84.
[11] HASAN S M，MANDAL A，SINGH S B，et al. Work hardening behaviour and damage mechanisms in carbide-free bainitic steel during uni-axial tensile deformation[J]. Materials Science and Engineering，2019，751（3）：142-153.
[12] ERIKSSON C L，LARSSON P L，ROWCLIFFE D J. Strain-hardening and residual stress effects in plastic zones around indentations[J]. Materials Science & Engineering A，2003，340（1）：193-203.
[13] LEI C，LI X，DENG X，et al. Deformation mechanism and ductile fracture behavior in high strength high ductility nano/ultrafine grained Fe-17Cr-6Ni austenitic steel[J]. Materials Science & Engineering A，2018（709）：72-81.
[14] BYUN T S，KIM I S. Tensile properties and inhomogeneous deformation of ferrite-martensite dual-phase steels[J]. Journal of Materials Science，1993，28（11）：2923-2932.
[15] HERTEL?魪 STIJN，O’DOWD NOEL，VAN MINNEBRUGGEN K，et al. Effects of pipe steel heterogeneity on the tensile strain capacity of a flawed pipeline girth weld[J]. Engineering Fracture Mechanics，2014（115）：172-189.

相似文献/References:

[1]李鹤林,李 霄,吉玲康,等.油气管道基于应变的设计及抗大变形管线钢的开发与应用[J].焊管,2007,30(5):5.[doi:1001-3938（2007）05-0005-07]
　LI He-lin,LI Xiao,JI Ling-kang,et al.Strainbased Design for Pipeline and Development of Pipe Steels with High Deformation Resistance[J].,2007,30(8):5.[doi:1001-3938（2007）05-0005-07]
[2]尹长华,闫 臣.厚壁钢管自保护药芯焊丝半自动焊接头氢含量较高的原因及控制措施[J].焊管,2008,31(2):71.[doi:1001－3938（2008）02－0071－04]
　YIN Chang-hua,YAN Chen.Origin and Control Measure of Thick Wall Steel Pipe Welded Joint Contain Mach Hydrogen for Self-shielded Flux-cored Wire Semiautomatic Welding[J].,2008,31(8):71.[doi:1001－3938（2008）02－0071－04]
[3]许贵芝 编译.国外干线管道焊接接头的加热和热处理[J].焊管,2008,31(5):89.[doi:1001－3938（2008）05－0089－02]
　Edited and translated by XU Gui-zhi.Heating and Heat Treatment of Welding Jointer in the Abroad Trunk Pipeline[J].,2008,31(8):89.[doi:1001－3938（2008）05－0089－02]
[4]许贵芝 编译.俄罗斯不锈钢管道焊接接头的局部热处理[J].焊管,2009,32(1):61.[doi:1001－3938（2009）01－0061－04]
　Edited and Translated by XU Gui-zhi.Part Heat Treatment of Stainless Steel Pipeline Welding Joints in Russia[J].,2009,32(8):61.[doi:1001－3938（2009）01－0061－04]
[5]胡丽华,张雷,路民旭.1Cr低合金管线钢焊接接头组织和性能研究[J].焊管,2009,32(7):18.[doi:1001－3938（2009）07－0018－04]
　HU Li-hua,ZHANG Lei,LU Min-xu.Research on Microstructure and Mechanical Properties of1Cr Low Alloy Pipeline Steel Weld Joint[J].,2009,32(8):18.[doi:1001－3938（2009）07－0018－04]
[6]何小东,马秋荣,王长安,等.高强度管线钢焊接接头不同缺口位置的断裂韧性研究[J].焊管,2009,32(8):21.[doi:1001－3938（2009）08－0021－05]
　HE Xiao-dong,MA Qiu-rong,WANG Chang-an,et al.Fracture Toughness of Welded joints at Different Notch Location and Discussion of Specifications for High Strength line Pipe[J].,2009,32(8):21.[doi:1001－3938（2009）08－0021－05]
[7]苏丽珍,何莹,李桂芝,等.高强管线钢管道环焊缝高强匹配研究[J].焊管,2009,32(9):27.[doi:1001－3938（2009）09－0027－04]
　SU Li-zhen,HE Ying,LI Gui-zhi,et al.High Strength Matching Study on Circumferential Weld of High Grade Line Pipe[J].,2009,32(8):27.[doi:1001－3938（2009）09－0027－04]
[8]邵晓东,刘养勤,李瑛,等.X80钢管件焊接接头中Ni含量分析方法研究[J].焊管,2010,33(3):29.[doi:1001－3938（2010）0３－0029－04]
　SHAO Xiao-dong,LIU Yang-qin,LI Ying,et al.Study on Analytical Method for Nickel Contentin Welded Joints of X80 Grade Fittings[J].,2010,33(8):29.[doi:1001－3938（2010）0３－0029－04]
[9]王香云.12Cr1MoVG钢焊接接头热裂纹的原因分析及对策[J].焊管,2010,33(4):13.[doi:1001－3938（2010）0４－0013－05]
　WANG Xiang-yun.12Cr1MoVG steel welding joint hot cracking reason analysis and countermeasures[J].,2010,33(8):13.[doi:1001－3938（2010）0４－0013－05]
[10]李建一,田　鹏,孙志刚,等.螺旋埋弧焊管二步法焊接接头性能分析[J].焊管,2011,34(12):69.[doi:1001-3938（2011）12-0069-04]
　LI Jian-yi,TIAN Peng,SUN Zhi-gang,et al.Analysis on Welded Joint Performance of Two-step Welding SAWH Pipe[J].,2011,34(8):69.[doi:1001-3938（2011）12-0069-04]

备注/Memo

备注/Memo:
收稿日期：2020-04-16
基金项目： 国家“十三五”重点研发计划课题“原油天然气储罐及附属管道、辅助设施安全评定与风险评价预警研究”（项目编号2017YFC0805804）。
作者简介：武 刚（1985—），硕士，高级工程师，主要从事油气管道及储存设施完整性技术方面的研究与工程技术服务工作。
更新日期/Last Update: 2020-09-16