相似文献/References:
[1]李珂,王自信,丁成飞.X80螺旋埋弧焊管管体强度影响因素分析[J].焊管,2010,33(4):22.[doi:1001－3938（2010）0４－0022－04]
LI Ke,WANG Zi-xin,DING Cheng-fei.Effect Factor Analysis on X80 SAWH Pipe Body Strength[J].,2010,33(11):22.[doi:1001－3938（2010）0４－0022－04]
[2]李景学.HFW焊管焊接质量的影响因素分析及应对措施[J].焊管,2011,34(2):54.[doi:1001-3938（2011）02-0054-04]
[3]牛靖,刘迎来,张骁勇,等.X80钢的热处理组织和性能研究[J].焊管,2011,34(6):14.[doi:1001-3938(2011)06-0014-06]
NIU Jing,LIU Ying-lai,ZHANG Xiao-yong,et al.Study on heat treatment microstructure and mechanical properties of pipeline steel X80[J].,2011,34(11):14.[doi:1001-3938(2011)06-0014-06]
[4]杨玮玮,曹雅彬,张海波,等.感应加热弯管整体淬火工艺对冲击性能的影响[J].焊管,2013,36(4):34.[doi:１００１－３９３８（２０１3）04-0034-03]
YANG Weiwei,CAO Yabin,ZHANG Haibo,et al.Influence of Whole Quenching Process of Induction Heating Bend on Impact Performance[J].,2013,36(11):34.[doi:１００１－３９３８（２０１3）04-0034-03]
[5]毕宗岳,牛爱军,牛 辉,等.国内外X80深水钻井隔水管主管性能对比[J].焊管,2013,36(11):5.[doi:１００１－３９３８（２０１3）11-0005-05]
BI Zongyue,NIU Aijun,NIU Hui,et al.Performance Comparison of Main Pipeline of X80 Deepwater Drilling Riser in Domestic and Overseas[J].,2013,36(11):5.[doi:１００１－３９３８（２０１3）11-0005-05]
[6]张国栋,白学军,李 颖,等.低温环境用厚壁大管径X80直缝埋弧焊管宽厚板的开发[J].焊管,2014,37(2):29.[doi:１００１－３９３８（２０１4）02-0029-04]
ZHANG Guodong,BAI Xuejun,LI Ying,et al.Development of Heavy Gauge Large Diameter X80 Pipeline Steel Platefor Low Temperature Environment Application[J].,2014,37(11):29.[doi:１００１－３９３８（２０１4）02-0029-04]
[7]刘振伟,王志太,孙志刚,等.高温预回火对X80螺旋埋弧焊管性能的影响[J].焊管,2015,38(11):20.[doi:１００１－３９３８（２０１5）11-0020-06]
LIU Zhenwei,WANG Zhitai,SUN Zhigang,et al.Influence of High-temperature Pre-tempering on X80 SAWH Pipe Performance[J].,2015,38(11):20.[doi:１００１－３９３８（２０１5）11-0020-06]
[8]方 伟,邹 斌,李为卫,等.K65（X80）管线钢断口分离及其对冲击韧性的影响[J].焊管,2018,41(2):65.[doi:10.19291/j.cnki.1001-3938.2018.02.015]
Edited and Translated by FANG Wei,ZOU Bin,LI Weiwei,et al.Separations and Their Contribution into the Impact Toughness of Pipeline Steels of Strength Class K65 (X80)[J].,2018,41(11):65.[doi:10.19291/j.cnki.1001-3938.2018.02.015]
[9]嵇 峰,张婷婷,吕成秀,等.X80钢级Φ1 219 mm×33 mm/37.9 mm热煨弯管研制[J].焊管,2019,42(1):17.[doi:10.19291/j.cnki.1001-3938.2019.1.003]
JI Feng,ZHANG Tingting,LYU Chengxiu,et al.Development of X80 Φ1 219 mm×33 mm/37.9 mm Hot Induction Bend Pipe[J].,2019,42(11):17.[doi:10.19291/j.cnki.1001-3938.2019.1.003]
[10]毕宗岳.新一代大输量油气管材制造关键技术研究进展[J].焊管,2019,42(7):10.[doi:10.19291/j.cnki.1001-3938.2019.7.002]
BI Zongyue,Key Technologies Research for New Generation Large Transportation Capacity Oil and Gas Pipeline Manufacturing[J].,2019,42(11):10.[doi:10.19291/j.cnki.1001-3938.2019.7.002]