相似文献/References:
[1]李鹤林,李 霄,吉玲康,等.油气管道基于应变的设计及抗大变形管线钢的开发与应用[J].焊管,2007,30(5):5.[doi:1001-3938（2007）05-0005-07]
LI He-lin,LI Xiao,JI Ling-kang,et al.Strainbased Design for Pipeline and Development of Pipe Steels with High Deformation Resistance[J].,2007,30(1):5.[doi:1001-3938（2007）05-0005-07]
[2]尹长华,闫 臣.厚壁钢管自保护药芯焊丝半自动焊接头氢含量较高的原因及控制措施[J].焊管,2008,31(2):71.[doi:1001－3938（2008）02－0071－04]
YIN Chang-hua,YAN Chen.Origin and Control Measure of Thick Wall Steel Pipe Welded Joint Contain Mach Hydrogen for Self-shielded Flux-cored Wire Semiautomatic Welding[J].,2008,31(1):71.[doi:1001－3938（2008）02－0071－04]
[3]许贵芝 编译.国外干线管道焊接接头的加热和热处理[J].焊管,2008,31(5):89.[doi:1001－3938（2008）05－0089－02]
Edited and translated by XU Gui-zhi.Heating and Heat Treatment of Welding Jointer in the Abroad Trunk Pipeline[J].,2008,31(1):89.[doi:1001－3938（2008）05－0089－02]
[4]许贵芝 编译.俄罗斯不锈钢管道焊接接头的局部热处理[J].焊管,2009,32(1):61.[doi:1001－3938（2009）01－0061－04]
Edited and Translated by XU Gui-zhi.Part Heat Treatment of Stainless Steel Pipeline Welding Joints in Russia[J].,2009,32(1):61.[doi:1001－3938（2009）01－0061－04]
[5]胡丽华,张雷,路民旭.1Cr低合金管线钢焊接接头组织和性能研究[J].焊管,2009,32(7):18.[doi:1001－3938（2009）07－0018－04]
HU Li-hua,ZHANG Lei,LU Min-xu.Research on Microstructure and Mechanical Properties of1Cr Low Alloy Pipeline Steel Weld Joint[J].,2009,32(1):18.[doi:1001－3938（2009）07－0018－04]
[6]何小东,马秋荣,王长安,等.高强度管线钢焊接接头不同缺口位置的断裂韧性研究[J].焊管,2009,32(8):21.[doi:1001－3938（2009）08－0021－05]
HE Xiao-dong,MA Qiu-rong,WANG Chang-an,et al.Fracture Toughness of Welded joints at Different Notch Location and Discussion of Specifications for High Strength line Pipe[J].,2009,32(1):21.[doi:1001－3938（2009）08－0021－05]
[7]苏丽珍,何莹,李桂芝,等.高强管线钢管道环焊缝高强匹配研究[J].焊管,2009,32(9):27.[doi:1001－3938（2009）09－0027－04]
SU Li-zhen,HE Ying,LI Gui-zhi,et al.High Strength Matching Study on Circumferential Weld of High Grade Line Pipe[J].,2009,32(1):27.[doi:1001－3938（2009）09－0027－04]
[8]孙宏.西气东输二线用国产X80钢级螺旋埋弧焊管性能分析[J].焊管,2010,33(2):13.[doi:1001－3938（2010）02－0013－04]
SUN Hong.Analysis on Domestic X80 Grade SAWH Pipe Property Used in the[J].,2010,33(1):13.[doi:1001－3938（2010）02－0013－04]
[9]邵晓东,刘养勤,李瑛,等.X80钢管件焊接接头中Ni含量分析方法研究[J].焊管,2010,33(3):29.[doi:1001－3938（2010）0３－0029－04]
SHAO Xiao-dong,LIU Yang-qin,LI Ying,et al.Study on Analytical Method for Nickel Contentin Welded Joints of X80 Grade Fittings[J].,2010,33(1):29.[doi:1001－3938（2010）0３－0029－04]
[10]王香云.12Cr1MoVG钢焊接接头热裂纹的原因分析及对策[J].焊管,2010,33(4):13.[doi:1001－3938（2010）0４－0013－05]
WANG Xiang-yun.12Cr1MoVG steel welding joint hot cracking reason analysis and countermeasures[J].,2010,33(1):13.[doi:1001－3938（2010）0４－0013－05]
[11]谢志远,乔桂英,等.X80大应变管线钢焊接热影响区疲劳性能的研究[J].焊管,2017,40(5):19.[doi:10.19291/j.cnki.1001-3938.2017.05.004]
XIE Zhiyuan,QIAO Guiying,ZHAO Zuopeng,et al.Research on Fatigue Performance of X80 Large Strain Pipeline Steel Heat Affected Zone[J].,2017,40(1):19.[doi:10.19291/j.cnki.1001-3938.2017.05.004]
[12]张晶,李霄,韦奉,等.软化对X80管线钢管气体保护焊接头承载能力的影响[J].焊管,2023,46(3):8.[doi:10.19291/j.cnki.1001-3938.2023.03.002]
ZHANG Jing,LI Xiao,WEI Feng,et al.Effect of Softening on Bearing Capacity of X80 Pipeline Gas Shielded Welding Joint[J].,2023,46(1):8.[doi:10.19291/j.cnki.1001-3938.2023.03.002]