[1]毕宗岳,王海博,王高峰.螺旋埋弧焊管焊缝形貌优化研究[J].焊管,2008,31(2):14-18.[doi:1001-3938(2008)02-0014-05]
 BI Zong-yue,WANG Hai-bo,WANG Gao-feng.Optimization Research on Weld Profile of Spiral Submerged Arc Welded Pipe[J].,2008,31(2):14-18.[doi:1001-3938(2008)02-0014-05]
点击复制

螺旋埋弧焊管焊缝形貌优化研究
分享到:

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
31
期数:
2008年第2期
页码:
14-18
栏目:
试验与研究
出版日期:
2008-03-28

文章信息/Info

Title:
Optimization Research on Weld Profile of Spiral Submerged Arc Welded Pipe
文章编号:
1001-3938(2008)02-0014-05
作者:
毕宗岳12王海博1王高峰2
(1.宝鸡石油钢管有限责任公司;2.西安石油大学 材料科学与工程学院)
Author(s):
BI Zong-yueWANG Hai-boWANG Gao-feng
关键词:
螺旋埋弧焊管焊接参数焊缝形貌双丝焊
Keywords:
spiral submerged arc welded pipewelding parameterweld profiledouble wires welding
分类号:
TG445
DOI:
1001-3938(2008)02-0014-05
文献标志码:
A
摘要:
对影响螺旋埋弧焊管焊缝成型的因素及焊缝成型的特征进行了较为详细的阐述,分析了螺旋埋弧焊管焊接工艺参数对焊缝形貌的影响,针对螺旋埋弧焊管成型焊接特征,试验研究了成型焊接主要工艺参数的变化对焊缝形貌的影响,同时对焊缝形貌进行了计算机优化和模拟,实际生产中取得了满意的效果。
Abstract:
This paper introduced that the characteristic of forming and the effecting factors of weld prefile of spiral submerged welded pipe,It is analyzed the effecting of welding parameters to weld profile of spiral submerged welded pipe.Aiming at characteristic of forming and welding,influence of variation of forming and welding parameters to weld profile is tested and researched which have achieved satisfied effect in actual production.

参考文献/References:

[1]毕宗岳.螺旋埋弧焊管3PE防腐涂层厚度不均的原因分析与处理方法[J].腐蚀与防护,2006,27(1):38-40.
[2]辛希贤.管线钢的焊接[M].西安:陕西科技出版社,1997.
[3]罗天宝,乔晓堂.浅谈螺旋埋弧焊钢管的焊缝外观形状控制[J].焊管,2006,29(2):52-55.
[4]张绍庆.双丝埋弧焊在螺旋焊管中的应用[J].焊管,1998,21(6):12-14.
[5]中国机械工程学会焊接学会.焊接手册第一卷焊接方法及设备[M].北京:机械工业出版社,2001.

相似文献/References:

[1]胡德虎,赵 炜,牛 辉,等.螺旋埋弧焊管双丝高速焊工艺参数的优化[J].焊管,2007,30(4):69.[doi:1001-3938(2007)04-0069-03]
 HU De-hu,ZHAO Wei,NIU Hui,et al.Process Parameters Optimization of High Speed Welding with Double Wires for Spiral Submerged Arc Welded Pipe[J].,2007,30(2):69.[doi:1001-3938(2007)04-0069-03]
[2]杨 志 孝.一种简单实用的螺旋埋弧焊管内焊清渣机[J].焊管,2007,30(5):63.[doi:1001-3938(2007)05-0063-03]
 YANG Zhi-xiao.New & Practical Welding Slag Cleaning Unit for Inside Welding of Helical Submerged Arc Welding Pipe[J].,2007,30(2):63.[doi:1001-3938(2007)05-0063-03]
[3]李必文,杨春雨,王树人,等.带钢边缘加工工艺的改进——双铣边替代剪边[J].焊管,2008,31(2):63.[doi:1001-3938(2008)02-0063-04]
 LI Bi-wen,YANG Chun-yu,WANG Shu-ren,et al.Improvement of Machining Process for Strip Edges-replacing Edges Cutting with Double Milling[J].,2008,31(2):63.[doi:1001-3938(2008)02-0063-04]
[4]秦跃平.前摆式螺旋埋弧焊管机组内焊缝裂纹产生原因分析[J].焊管,2008,31(4):62.[doi:1001-3938(2008)04-0062-02]
 QIN Yue-ping.Analysis on Reason of Inside Weld Crack of Front Swing SSAW Pipe Units[J].,2008,31(2):62.[doi:1001-3938(2008)04-0062-02]
[5]林春明,徐泽旋,朱文闯,等.螺旋埋弧焊管焊缝中链状气孔的判定[J].焊管,2008,31(4):69.[doi:1001-3938(2008)04-0069-03]
 LIN Chun-ming,XU Ze-xuan,ZHU Wen-chuang,et al.Verification to Chain Porosity in Weld of SSAW Pipe[J].,2008,31(2):69.[doi:1001-3938(2008)04-0069-03]
[6]李为卫,王亚龙,李 洋,等.小批量试制X80级板卷及焊管的拉伸性能分析[J].焊管,2008,31(5):16.[doi:1001-3938(2008)05-0016-04]
 LI Wei-wei,WANG Ya-long,LI Yang,et al.Analysis on Tensile Properties of Small Batch Trial-produced X80 Grade Steel Coil and Welded Pipe[J].,2008,31(2):16.[doi:1001-3938(2008)05-0016-04]
[7]郭宏侠,尹长华.中厚度钢板单面焊全熔透焊缝焊接技术[J].焊管,2008,31(6):69.[doi:1001-3938(2008)06-0069-03]
 GUO Hong-xia,YIN Chang-hua.Welding Technology of One Side Full Penetration Welding for Heavy Plate[J].,2008,31(2):69.[doi:1001-3938(2008)06-0069-03]
[8]张心保,岳维恒.装饰用430不锈钢矩形薄壁焊管制造工艺[J].焊管,2009,32(5):42.[doi:1001-3938(2009)05-0042-03]
 ZHANG Xin-bao,YUE Wei-heng.Manufacture process of ornamental rectangular thin wall welded tube made of 430 stainless steel[J].,2009,32(2):42.[doi:1001-3938(2009)05-0042-03]
[9]陈小康,张毅.螺旋埋弧焊管生产过程卷板消耗定额编制方法及应用[J].焊管,2009,32(5):70.[doi:1001-3938(2009)05-0070-03]
 CHEN Xiao-kang,ZHANG Yi.Formulate Steel Coil Consumption Quota Method During SSAW Pipe Production and Its Application[J].,2009,32(2):70.[doi:1001-3938(2009)05-0070-03]
[10]孟德强,宁月,徐辉.螺旋埋弧焊管常见焊接裂纹的分析[J].焊管,2009,32(7):58.[doi:1001-3938(2009)07-0058-04]
 MENG De-qiang,NING Yue,XU Hui.Analysis on Common Welding Crack of SSAW Pipe[J].,2009,32(2):58.[doi:1001-3938(2009)07-0058-04]
[11]宗 波,王树人,王铁民,等.国产X80级螺旋埋弧焊管的试制[J].焊管,2008,31(6):39.[doi:1001-3938(2008)06-0039〖KG-*2〗-04]
 ZONG Bo,WANG Shu-ren,WANG Tie-min,et al.Trial Production of X80 Grade Helically Submerged Arc Welded Pipe in China[J].,2008,31(2):39.[doi:1001-3938(2008)06-0039〖KG-*2〗-04]
[12]刘德应,易建军,严绍书,等.X100大直径螺旋埋弧焊管的试制[J].焊管,2012,35(3):60.[doi:1001-3938(2012)03-0060-06]
 LIU De-ying,YI Jian-jun,YAN Shao-shu,et al.Trial-production of X100 Large Diameter SAW Pipe[J].,2012,35(2):60.[doi:1001-3938(2012)03-0060-06]

备注/Memo

备注/Memo:
毕宗岳(1962-),男,高级工程师,西安石油大学在读材料硕士研究生,长期从事焊管技术工作,发表论文10多篇。
收稿日期:2007-09-11
更新日期/Last Update: